TYAN TOMCAT K8E Manual page 77

3. Use the arrow keys to select the array that you want to set up, then press B
to specify the array as bootable.
4. Press Enter to view and verify details.
The Array Detail screen appears.
RAID Mode: Mirroring
Striping Width: 1
Adapt Channel
1 0
1 1
[R] Rebuild
The Array Detail screen shows various information about the array that you
selected, such as Striping Block used, RAID Mode, Striping Width, Disk Model
Name, and disk capacity.
5. If you want to mark this disk as empty and wipe out all its contents, press C.
6. At the prompt, press Y to wipe out all the data, otherwise press N.
7. Press Enter again to go back to the previous screen and then press F10 to
exit the RAID setup.
Array 2: NVIDIA MIRROR 75.56G
- Array Detail -
M/S Index Disk Model Name
Master 0 ST380023AS
Master 1 ST380023AS
[D] Delete [C] Clear Diskt [Enter] Return
77
http://www.tyan.com
Striping Block 32k
Capacity
74.56GB
74.56GB