TYAN TOMCAT K8E Manual page 44

Virus Warning
This item allows you to use the function of virus warning.
Enabled / Disabled
CPU Internal / External Cache
This option toggles the use of CPU L1 or L2 cache. The L1 cache is also called
the primary cache or internal cache. The L2 cache also called as the external
cache is placed between the CPU and the DRAM (dynamic RAM).
Enabled / Disabled
Quick Power On Self Test
This option allows you to use the function of quick power on test.
Enabled / Disabled
First, Second, and Third Boot Devices
These indicate the boot priority. For example if the First Boot Device is set as
Removable, the Second Boot Device as CDROM, and the Third Boot Device as
Hard Disk, then the system will try to boot from a removable drive. If it fails, the
system will try to boot from a CDROM. If this also fails, it will try to boot from the
Hard Disk.
Boot Other Device
This option allows the system to boot from any other bootable device.
Enabled / Disabled
Swap Floppy Drive
This feature allows the system to swap floppy drive.
Enabled / Disabled
Boot Up Floppy Seek
During Power-On Self-Test (POST), BIOS will determine if the floppy disk drive
installed is 40 or 80 tracks.
Enabled / Disabled
Boot Up NumLock Status
This option, when enabled, automatically turns on your NumLock key when the
system is booted. This is a matter of personal taste.
On /Off
Gate A20 Option
This feature determines how Gate A20 is used to address memory above 1MB.
When set to Fast, the motherboard chipset controls the operation of Gate A20.
But when set to Normal, a pin in the keyboard controller controls Gate A20.
Fast / Normal
44
http://www.tyan.com