TYAN TOMCAT I845 Manual page 36

This item controls the number of DRAM clocks used for DRAM Tras parameters.
6T/8T / 7T /10T / 5T/6T / 8T/12T
Active to CMD (Trcd):
This item controls the number of DRAM clocks used for DRAM Trcd parameters.
2T / 3T / 4T / 5T
DRAM Command Rate:
This item selects DRAM command rate parameters.
2T Command / 1T Command
DRAM Burst Len:
This item selects DRAM burst length parameters.
4 / 8
Write Recovery Time:
This item selects Write Recovery Time parameters.
2T / 3T
VGA Share Memory Size
CPU Direct Access FB
Select Display Device
Panel Type
TV_type
TV_Connector
TV_Layout
Dithering
↑↓←→: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CPU Direct Access FB:
Enable / Disable CPU Direct Access FB
Disabled/Enabled
Select Display Device:
Select Display Device type
CRT / LCD / CRT+LCD / TV / CRT+TV / LCD+TV / DVI / CRT+DVI / TV+DVI
Panel Type:
Show panel type
Phoenix – AwardBIOS CMOS Setup Utility
AGP & P2P Bridge Control
[64M]
[Enabled]
[CRT]
[7]
[NTSC]
[CVBS]
[Default]
[Disabled]
http://www.TYAN.com
_________________________
Menu Level ►
36
Item Help