Adjusting Bass - Pioneer AVIC-80DVD Operation Manual

Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM1 or CUSTOM2.
Level (dB)
Center frequency
1 Press 5 or ∞ to select "EQUALIZER MENU" from the AUDIO MENU, and press
A.MENU (AUDIO) button.
The EQUALIZER MENU is displayed.
BAND (band), LEVEL (adjustment level), FREQUENCY (Center frequency), Q FAC-
TOR (quality factor)
2 Select the equalizer band you want to adjust with 2 2 2 2 / 3 3 3 3 .
BAND (band) :
LEVEL (adjustment level) :
FREQUENCY (Center frequency)
LOW :
MID :
HIGH :
Q FACTOR (quality factor) :
➲
If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve
is updated.
sAdjusting bass
You can adjust the cut-off frequency and the bass level.
➲
In FRONT1 mode, bass adjustment affects only the rear output: front output cannot be
adjusted.
1 Press 5 or ∞ to select "BASS" from the AUDIO MENU, and press A.MENU (AUDIO)
button.
2 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases the bass level. +6 - -6 is displayed as the
level is increased or decreased.
3 Select the desired frequency with 2 2 2 2 / 3 3 3 3 .
40 - 63 - 100 - 160 (Hz)
144
Q=2W
Q=2N
Frequency (Hz)
LOW (low) - MID (mid) - HIGH (high)
+6 - -6 is displayed as the adjustment level is
increased or decreased.
40 - 80 - 100 - 160 (Hz)
200 - 500 - 1 k - 2 k (Hz)
3.15 k - 8 k - 10 k - 12.5 k (Hz)
2 N - 1 N - 1 W - 2 W