Related Manuals for Fisher & Paykel MINIMAL OB60SMPTDB
Summarization of Contents
Safety and Warnings
Electric Shock Hazard
Warnings related to electric shock or death from improper electrical work.
Fire Hazard
Precautions against overheating, burning, and injury due to improper connection.
Cut Hazard
Cautionary advice regarding sharp edges during handling to prevent injury.
General Installation Warnings
Instructions to follow before installation to avoid hazards and ensure correct use.
Prior to Installation
Installation Requirements Check
Verify cavity dimensions, clearances, regulations, and electrical provisions.
Site Preparation and Safety
Ensure accessible switch, proper cable length, and consider environmental factors.
Installation Milestones
Key Installation Stages
Highlights pivotal steps for optimal outcome requiring installer attention.
Alignment and Locking
Ensure hinges are locked and oven is aligned with cabinetry.
After Installation
Final Operational Checks
Confirm door opens freely, cable placement, and switch accessibility.
Installation Support
Contact service if performance issues arise post-installation.
Components
Supplied Parts
Lists the screws and metal side shelves provided with the oven.
Tools Required
Identifies necessary tools like powered driver and screwdriver.
Product Dimensions
Oven Dimensions
Detailed measurements of the oven's height, width, and depth.
Handle and Panel Dimensions
Specific measurements for the control panel and door handle.
Minimum Clearances
Required internal cavity dimensions for installation.
Cabinetry Dimensions
Cabinetry Measurements
Specifies required internal cavity width, height, and depth for installation.
Installation Types
Illustrates proud and flush installation methods with clearance details.
Check Cavity
Cavity Specification Check
Verify cavity dimensions against minimum specifications.
Cabinetry and Service Access
Ensure dark cabinetry compatibility and adequate service access.
Unpack Product
Handling Precautions
Advice on lifting, inspecting for damage, and keeping packing materials.
Step-by-step Unpacking
Instructions for removing packaging, accessories, and responsible disposal.
Remove Door
Shelf Removal
Procedures for removing oven shelves and packaging.
Hinge Lock Release
Steps to locate and release hinge locks for door removal.
Connect Power
Power Connection Requirements
Oven must be connected by a qualified person and be earthed.
Wiring System Check
Verify domestic wiring suitability and voltage correspondence with rating plate.
Terminal Block Connection
Instructions for accessing and connecting to the terminal block correctly.
Position Oven into Cavity
Cabinetry Trim Installation
Optional trim for dark cabinetry to enhance finish.
Oven Placement
Steps for lifting and placing the oven into the prepared cavity.
Refit Door
Door Reattachment
Guide on carefully lifting and placing the door back onto the hinges.
Hinge Locking Mechanism
Instructions to open the door and lock the hinge levers securely.
Align and Secure
Cabinetry Alignment
Align oven with surrounding cabinetry and appliances for a neat fit.
Securing the Oven
Pre-drilling pilot holes and securing the oven using provided screws.
Refit Shelves
Sliding Shelves Installation
Placing sliding shelves correctly with guard rail at the back.
Wire Shelves and Supports
Inserting wire shelves and fitting clip-on sliding shelf supports properly.
Test Oven
Functional Check
Follow on-screen guidance to ensure the oven turns on and heats correctly.
Installer Checklist
Final Installation Verification
Check oven level, trim integrity, door clearance, and vent clarity.
Customer Information Recording
Record model, serial number, purchase date, and installer details.
Need help?
Do you have a question about the MINIMAL OB60SMPTDB and is the answer not in the manual?
Questions and answers