Related Manuals for Truper 15200
Summary of Contents for Truper 15200
- Page 1 Manual Hammer Drill 0.9 Hp 1/2” Power Chuck Applies for: Code Model 15200 ROTO-1/2N6-2 ROTO-1/2N6-2 Read the user’s manual thoroughly CAUTION before operating this tool.
-
Page 2: Table Of Contents
Manual before using the tool. Parts Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference only. They might be different from the real tool. Maintenance Authorized Service Centers Warranty Policy ROTO-1/2N6-2 ENGLISH... -
Page 3: Technical Data
Technical Data ROTO-1/2N6-2 Code 15200 Description Hammer Drill Chuck 1/2” Voltage 220 V Frequency 50 Hz / 60 Hz Current 3.2 A Power 0.9 Hp Speed Drill: 0 - 3 100 RPM | Hammer Drill: 0 - 49 600 strokes/min Work Capacity Metal: 0.38”... -
Page 4: General Power Tool Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instruction listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Page 5: Safety Warnings For Drills And Hammer Drills
Safety Warnings for Drills and Hammer Drills Select the Right Bit While Operating the Hammer Drill CAUTION • Select the right bit for the material. • Hold the tool using both the main handle and the This reduces the risk of severe injuries and makes the auxiliary handle if supplied with the tool. -
Page 6: Parts
Parts Depth Impact-Rotation Control Rod Selector Handle Chuck Speed Continuous Rotation Auxiliary Control Operation Button Selection Handle Button Power Cord Protector Switch Power Cable Chuck Key Holder Chuck Assembly 1. Turn the auxiliary handle in a clockwise direction while released so Depth that the opening in the mount gets Control Rod... -
Page 7: Start Up
Start Up Bit Fitting Chuck • Put the bit into the chuck until it stops. Fasten with the chuck key and tighten the chuck alternatively into each of the orifices. WARNING • Clean burr and any other foreign object from the bit and the chuck. Otherwise, the bit cannot be tight and could cause personal injuries. -
Page 8: Maintenance
Maintenance Chuck Replacement • Remove the auxiliary handle and pen the chuck jaws all the way. • Using a screwdriver remove the left-threaded safety screw with a clockwise movement. • Fit the long side of an “L” Allen key (not included) in a vise and insert the short side of the “L”... -
Page 9: Authorized Service Centers
Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center. -
Page 10: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Stamp of the business.
Need help?
Do you have a question about the 15200 and is the answer not in the manual?
Questions and answers