Related Manuals for GW Instek GPE-6030
Summarization of Contents
SAFETY INSTRUCTIONS
Safety Symbols
Details of safety symbols used in the manual, including warnings and cautions.
General Safety Guidelines
General safety precautions for operating and handling the device, including impact and static electricity.
Power Supply and Fuse Safety
Important safety information regarding AC input voltage, grounding, fuse replacement, and electrical shock prevention.
Cleaning Safety
Safe procedures for cleaning the device, including recommended cleaning agents and methods.
Operation Environment
Recommended operating environment conditions such as location, humidity, altitude, and temperature.
Storage Environment
Recommended storage environment conditions, including temperature and humidity limits.
Disposal Instructions
Instructions for the proper disposal of electronic equipment to minimize environmental impact.
OVERVIEW
Introduction to GPE Series
Provides a general introduction to the GPE series power supply and its capabilities.
Series Lineup and Main Features
Details the different models in the GPE series and their key features and functionalities.
Principle of Operation
Explains the internal working principles and block diagram of the power supply.
Front Panel Overview
A detailed description of the front panel layout, controls, and display elements.
Rear Panel Overview
A detailed description of the rear panel connectors, controls, and indicators.
CV/CC Crossover Characteristics
Explains the automatic switching between Constant Voltage (CV) and Constant Current (CC) modes.
SETUP
Power Up Procedure
Step-by-step instructions for powering up the GPE series power supply correctly.
Load Cable Connection
Guides on how to connect loads using standard accessories and banana plugs.
Output On/Off Control
Instructions on how to turn the power supply output on and off using panel operations.
CH1/CH2 Series or Parallel Mode Selection
Procedure for connecting CH1 and CH2 in series or parallel for increased voltage or current.
Setting Lock Function
How to enable and disable the front panel lock function to prevent accidental changes.
Output State at Startup
Configuration options for setting the default output state (ON or OFF) upon startup.
Display Digit Resolution Setting
Instructions on how to set the displayed digit resolution for voltage and current readings.
Remote Control Setting
Configuration of the remote control terminal for power on/off and output control.
OPERATION
CH1/CH2 Independent Mode
Operating CH1 and CH2 outputs independently, setting voltage and current for each channel.
CH3 Independent Mode
Operating the CH3 output independently, connecting the load and turning the output on.
CH1/CH2 Series Tracking Mode
Combining CH1 and CH2 outputs in series for higher voltage, controlled by CH1.
CH1/CH2 Parallel Tracking Mode
Combining CH1 and CH2 outputs in parallel for higher current, controlled by CH1.
FAQ
Lock Key and Output Control
Explanation on why the output key is not affected by the panel lock feature.
CH3 Overload Indicator
Clarification of the CH3 overload indicator and its meaning regarding current limits.
Specifications vs. Accuracy
Guidance on ensuring accurate readings by powering the supply for a specified duration and temperature.
APPENDIX
Fuse Replacement
Step-by-step guide on how to safely replace the fuse in the power supply.
Specifications
Detailed technical specifications for the GPE series power supply, including ratings and performance.
Meter Display Specifications
Details on the LCD display resolution, readback accuracy for voltage and current.
Declaration of Conformity
Statement confirming the product's compliance with relevant technical regulations and standards.
Need help?
Do you have a question about the GPE-6030 and is the answer not in the manual?
Questions and answers