Boot; Security; Exit - TYAN TIGER I7501S Manual

3.16 – ACPI Advanced
Options related to advanced power management settings interface can be altered through the
following options.
ACPI APIC Support
BIOS à AML ACPI Stable
Headless Mode
After Power Fail
Power button instant off
Watchdog Timer
WOL S1 & S5
3.17 – Boot
Options related to boot dev ices can be altered through the following.
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CDROM Drives
Interrupt 19 Capture
3.18 – Security
Options related system security can be altered through the following.
Change Supervisor
Password
Change User Password
Clear User Password
Boot Sector Virus
Protection
3.19 – Exit
Options related exiting and saving can be done using the following.
Exit Saving Changes
Exist Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
This option allows you to define whether or not to enable ACPI
management features.
Please leave this option at its default setting. This setting toggles
BIOS control of ACPI power features.
Enable
Disable
Allows system to reboot after a power failure.
Previous
State
Enabled
Choose between instant on/off or a 4 second delay.
Disabled
Enable Do not enable unless you are familiar with this
Disable feature
Enabled Enables Wake On Lan support. (Only on 82551
Disabled NIC.)
1st Boot Device
2nd Boot Device
3rd Boot Device
Specifies the boot sequence for hard drive booting. This option
will show all storage devices.
Specifies the boot sequence for removable drive booting. This
option will show all removable devices.
Specifies the boot sequence for CD-ROM drive booting. This
option will show all CD-ROM devices.
This option allows removable devices to act as non-removable
devices. Some SCSI RAID cards will need this one enabled.
Please refer to your SCSI card's documentation.
Changes system password.
Changes boot password.
Clears boot password.
Enabled Toggles protection of boot sector on the hard drive
Disabled from being modified.
Exit and save options.
Exit but don't save options.
Load the BIOS setup default settings.
Discard any changes made.
Save changes.
36
http://www.TYAN.com
Settings for boot priority. These can be
customized depending on your
preference.