Table of Contents
Advertisement
2.12 – Installing CPU Back-plates and retention modules
The following diagrams will illustrate how to install the included heatsink retention modules and
CPU back-plates. You should have: two back-plates and 9 screws. (Four screws for each plate
and one spare screw.)
NOTE: The back-plates must be installed prior to installing the motherboard into a chassis.
(Certain 1U chassis may not require the back-plates.)
1)
Align the heatsink mounting bracket to the holes around the processor socket
2)
Insert screws into bracket holes
20
http://www.TYAN.com
Advertisement
Table of Contents
