Table of Contents
Advertisement
3.3 – IDE Configuration
Options related to the IDE controller can be altered through the following.
Onboard PCI IDE
Controller
Primary Master/Slave
Secondary Master/Slave
Hard Disk Write Protect
ATAPI Detect Time Out
ATAPI 80pin Cable
Detect
S-ATA IDE Configuration
Onboard PCI IDE
operate mode
IDE Configuration
Combined Mode
operation
SATA ports Definition
Both
Primary
Secondary
Auto
Disabled
Enabled
Disabled
0, 5, 10, 15, 2.0x,
2.5x, 3.0x, 3.5x
Host & Device
Host
Device
Legacy Mode
Native Mode
Disabled
P-ATA only
S-ATA only
P-ATA and S-ATA
Pri. P-ATA
Pri. S-ATA
P0 Slave/ P1 Master
P1 Slave/ P0 Master
31
http://www.TYAN.com
Leave as Default. This setting toggles the
onboard IDE drive controller on or off.
Leave as Default. This setting toggles the
detection of drives attached to the IDE
controller
Toggles the use of boot sector protection.
This ensures that no viruses can damage the
hard drive.
Defines how long the system will try to detect
ATAPI devices for.
Toggles the detection of 80wire IDE cables.
Leave as Default.
Select combination you wish to use.
Note only 4 IDE drives can be used at
one time no matter what the
combination.
Select whether SATA or P-ATA will be
your primary hard drive.
Advertisement
Table of Contents
