Installing The Power Supply - TYAN TIGER I7322DP Manual

Link
100Mbps
Activity
100Mbps
Link
1000Mbps
Activity
1000Mbps

2.14- Installing the Power Supply

There are two power connectors on your Tiger i7322DP.
The Tiger i7322DP requires an EPS12V (24 pin + 8 pin) power supply to boot.
Please be aware that ATX 2.x and ATXGES power supplies are
with the board and can damage the motherboard and/or CPU(s).
compatible
EPS12V Main Power 24-Pin
(Chipsets & Components)
1
13
4
1
5
8
Applying power to the board
1. Connect the EPS 12V 8-pin power connector.
2. Connect the EPS 12V 24-pin power connector.
3. Connect power cable to power supply and power outlet
YOU MUST unplug the power supply from the wall outlet before
NOTE
plugging the power cables to motherboard connectors.
Green (Blink)
Green (Blink)
12 +3.3V 24
1 2
11 +12V3 23
10 +12V3 22
9 +5VSB 21
8 PWR OK 20
2 4
7 GND 19
6 +5V 18
5 GND 17
4 +5V 16
3 GND 15
2 +3.3V 14
1 +3.3V 13
EPS 12V 8-pin (CPU Power)
4 GND 8 +12V2
3 GND 7 +12V2
2 GND 6 +12V1
1 GND 5 +12V1
34
http://www.tyan.com
Green
Green (Blink)
Yellow
Yellow (Blink)
not
GND
+5V
+5V
+5V
RESET
GND
GND
GND
PS_ON
GND
-12V
+3.3V