Table of Contents
Advertisement
2.29 – Connecting External Devices
Connecting external devices to the motherboard is an easy task. The standard
devices you should expect to plug into the motherboard are keyboards, mice, and
printer cables. The following diagram will detail the ATX port stack for the following
board:
2.30– Installing the Power Supply
There are five power connectors on your Thunder K8QSD Pro. Tyan recommends
that you have an EPS12V power supply that has one 24-pin, two 8-pin power
connectors and two 4-pin power connectors.
J29: 24-pin EPS 12V power connector
r
J63: 8-pin EPS 12V power connecto
J25: 8-pin EPS 12V power connector
J89: 2x2 pin ATX 12V power connector
J90: 1x4 pin 5V power connector
The Thunder K8QSD Pro is standard EPS 12V compatible, please take following
combination for reference. Please be aware that ATX 2.x, ATX12V and ATXGES
power supplies are not compatible with the board and can damage the motherboard
and/or CPU(s).
34
http://www.TYAN.com
Advertisement
Table of Contents
