TYAN THUNDER K8HM Manual page 50

3.5.5 S-ATA Configuration Sub-Menu
You can use this screen to view S-ATA Configuration Menu. Use the up and
down arrow (á/â) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option. The settings are described on the
following pages.
Main Advanced
Configure ServerWorks
HT1000 S-ATA
S-ATA Mode
INT13 Support
Feature
Configure ServerWorks
HT1000 S-ATA
S-ATA Mode
INT13 Support
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[P-ATA]
[Enabled]
Option
Enabled
Disabled
P-ATA
S-ATA
RAID
Enabled
Disabled
50
http://www.tyan.com
Security Chipset
Enable HT1000
S-ATA.
¡ö ¡÷ Select Screen
¡ô¡õ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Allows user to enable or disable
HT1000 S-ATA controller.
Sets S-ATA mode as P-ATA
emulation native S-ATA, or RAID.
Enables or disables INT13 support.
Exit