TYAN THUNDER K8HM Manual page 49

3.5.4 – Super IO Configuration Sub-Menu
You can use this screen to select options for the Super I/O settings. Use the
up and down arrow (á/â) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option
Main Advanced
Configure Nat417 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Feature
Configure Nat417 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
Option
Enabled
Disabled
3F8/IRQ4
3E8/IRQ4
2E8/IRQ3
Disabled
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
49
http://www.tyan.com
Security Chipset
Allows BIOS to enable
or disable Floppy
Controller.
¡ö ¡÷ Select Screen
¡ô¡õ Select Item
+/-
F1
F10 Save and Exit
ESC Exit
Description
Allows BIOS to enable or disable the
floppy controller.
Allows BIOS to select Serial Port1
Base Addresses.
Allows BIOS to select Serial Part2
Base Addresses.
Exit
Change Option
General Help