Onboard Device Configuration; Usb Configuration; Pcipnp - TYAN THUNDER I7501 XTREME Manual

Table of Contents

Advertisement

3.7 – Onboard Device Configuration
Options related to onboard devices can be altered through the following.
Onboard ATI RageXL
Video
Onboard 82551
Onboard 82546 #1
Onboard 82546 #2
Onboard SCSI
3.8– USB Configuration
Options related to USB can be altered through the following.
USB Function
Legacy USB Support
USB Zip Emulation Type
USB Beep Message
3.9 – PCIPnP
Options related to the Plug and Play PCI settings interface can be altered through the following.
Plug & Play OS
Reset Config Data
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
Offboard PCI/ISA IDE Card
IRQ 3, 4, 5, 7, 9, 10, 11,
14, 15
DMA Channel
0, 1, 3, 5, 6, 7
Enabled
Toggles the onboard ATI video graphics.
Disabled
Enabled
Toggles 100Mbit LAN port.
Disabled
Enabled
Toggles the dual 1Gbit LAN ports.
Disabled
Enabled
Toggles the dual 1Gbit LAN ports.
Disabled
Enabled
Toggles the onboard SCSI controller.
Disabled
Enabled
Toggles the onboard USB ports.
Disabled
Enabled
Disabled
Toggles the use of onboard USB ports in DOS.
Auto
Enabled
Toggles Zip drive emulation on USB ports
Disabled
when in use.
Auto
Enabled
Toggles USB beep error messaging.
Disabled
Yes
No
Yes
No
32, 64, 96, 128,
160, 192, 224, 248
Yes
No
Enabled
Disabled
Enabled
Disabled
Auto
Enabled
Disabled
These settings enable you to set which IRQs will be reserved for
other devices other than the ones that use them by default.
These settings enable DMA channel 0 and 1 to be enabled or
disabled.
28
http://www.TYAN.com
Toggles the option of letting the OS take
care of IRQ routing or the BIOS. Select
Yes to let the OS manage IRQ settings.
Resets BIOS area where IRQ and DMA
settings are stored.
Leave on 64 for best combination of
performance and stability.
Assigns an IRQ to PCI video card.
Palette Snooping can fix color problems
associated with non-standard video cards
such as MPEG decoders.
Toggles the onboard IDE controllers to
operate in BusMaster mode.
Enables the system to recognize and boot
from an add-in IDE controller card.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thunder i7501xtreme s2726g5n

Table of Contents