Related Manuals for Riello SDH 3000 ER
Summarization of Contents
Introduction
Environmental Protection
Summarizes the company's commitment to environmental responsibility and the use of recyclable materials in product packaging.
Disposing of the Product
Provides guidance on the correct disposal of UPS and Battery Box components, identifying them as toxic and hazardous waste.
UPS Views
Front View
Identifies and labels the key components visible on the front panel of the UPS unit, including the display and controls.
Rear View
Model 1000VA / 1500VA
Details the specific rear panel connectors and components for the 1000VA and 1500VA UPS models.
Model 2200VA / 3000VA
Details the specific rear panel connectors and components for the 2200VA and 3000VA UPS models.
Display Panel View
Display Panel and Controls
Explains the layout and functions of the UPS's front panel display screen and the associated control buttons.
Battery Box (Accessory Not Supplied with the UPS)
Rear View
Illustrates the rear panel of the optional Battery Box, showing its connectors and mounting points.
Installation
Initial Content Check
Lists all the essential items included in the UPS package that must be verified after unpacking.
Installation Environment
Battery Box Installation
Provides instructions and precautions for connecting and installing additional battery boxes to extend UPS runtime.
Setting the Nominal Battery Capacity
Guides users on configuring the UPS with the correct total battery capacity, including external boxes.
Tower Version
Tower Configuration Steps
Details the procedure for assembling support feet and positioning the UPS for vertical tower installation.
Tower Version with Battery Box
Tower Configuration with Battery Box
Explains how to assemble support feet and place the UPS and battery boxes together for tower setup.
Rack Version
Rack Configuration Steps
Outlines the process for rotating panels and attaching handles to mount the UPS horizontally in a rack cabinet.
Use
Connections and Switching On for the First Time
Step-by-step guide for connecting the UPS and performing the initial power-on sequence.
Switching On from the Mains
Instructions for powering up the UPS unit from the main power supply.
Switching On from the Battery
Instructions for powering up the UPS unit using its internal battery.
Switching Off the UPS
Procedures for safely shutting down the UPS unit and returning it to standby mode.
Display Panel Messages
UPS Status Messages
Describes the various icons displayed on the UPS panel, their status (fixed/flashing), and their meanings.
Measurement Display Area
Displaying Measurements
Explains how to navigate the UPS display to view different operational parameters like voltage, frequency, and load.
Configuring the Operating Mode
Possible Settings
Details the different operating modes available for the UPS, such as ON-LINE, ECO, and SMART ACTIVE.
Additional Functions
Covers advanced features like Manual Bypass, explaining their functionality and operation.
Programmable Auxiliary Socket (EnergyShare)
Remote Control Terminal Board
Describes the functionality of the REPO (Remote Emergency Power Off) terminals and their connection logic.
Software
Monitoring and Control Software
Introduces the PowerShield³ software for UPS management, monitoring, and automated event responses.
Configuration Software
Details the UPStools software for configuring UPS settings and viewing its operational status.
UPS Configuration
Configuration Options
Presents a table of configurable functions for the UPS, including output settings, operating modes, and alarms.
Communication Ports
RS232 Connector
Provides a detailed pinout diagram and signal description for the UPS's RS232 communication port.
Communication Slot
Explains the purpose of the expansion slot and lists examples of optional communication cards available.
Battery Pack Replacement
Battery Pack Replacement Procedure
Step-by-step guide for safely replacing the UPS battery pack, including necessary precautions.
Troubleshooting
General Display Issues
Addresses common problems related to the UPS display not lighting up, load not being powered, or unexpected battery operation.
Specific Error Codes
Lists and describes specific error codes displayed by the UPS, aiding in initial fault diagnosis.
Operational Alerts & Faults
Summarizes common operational alerts, fault codes, overload conditions, and malfunctions indicated by the UPS.
Remote Commands & Bypass Status
Covers UPS status related to remote commands and the activation of the manual bypass function.
Technical Data
Input
Provides technical specifications for the UPS's input power parameters.
Battery
Lists technical specifications related to the UPS's battery system and its performance.
Output
Details the technical specifications for the UPS's output power characteristics and behavior under various load conditions.
Other Data
Includes additional technical specifications such as leakage current, temperature, humidity, dimensions, and weight.
Need help?
Do you have a question about the SDH 3000 ER and is the answer not in the manual?
Questions and answers