Related Manuals for Hunter Anisten 52775
Summarization of Contents
Safety and General Information
Read and Save Instructions
Instruction to keep the manual for future reference and safety.
Warning
Crucial safety warnings regarding electrical shock, injury, and proper fan mounting.
Caution
Advisories for safe installation, wiring, and user supervision, ensuring compliance with codes.
Required Tools for Installation
Tools List
Lists essential tools for fan installation and optional tools for specific mounting configurations.
Parts Included in the Box
Component Identification
Overview of all fan components and hardware, with drawings to aid identification.
Choosing the Right Installation Location
Room Dimension Checks
Ensures adequate clearance from blades to walls and floor for safe operation.
Outlet Box Check
Verifies the outlet box is securely mounted and suitable for fan support.
Checking the Ceiling Angle
Standard Mounting
Describes mounting a fan on a flat ceiling using a standard downrod.
Angled Mounting Requirements
Details needs for angled ceilings, including downrod length and angled mounting kits.
Installing the Ceiling Bracket
Option 1: Machine Screws
Securing the bracket to an existing ceiling fan-rated outlet box using machine screws.
Option 2: Wood Screws
Mounting the bracket to a support structure using wood screws and pilot holes.
Wiring the Fan
Single Switch Wiring Diagram
Illustrates connecting ceiling wires to the fan's terminal block for single-switch operation.
Installing the Downrod
Downrod Assembly and Tightening
Procedure for attaching the downrod, ensuring setscrews are tight to prevent fan falls.
Hanging the Fan
Mounting Fan to Ceiling Bracket
Procedure for lifting and seating the fan's downrod ball into the ceiling bracket slot.
Making Connections for the Receiver
Wiring Harness Connections
Connecting wiring harnesses from ceiling, receiver, and fan, matching colored wires.
Ground Wire Connection
Connecting the grounding wire plug from the downrod to the ceiling bracket.
Installing the Canopy
Securing the Canopy
Fitting the canopy into place and aligning screw holes to attach it with canopy screws.
Installing the Blades
Attaching Blades to Blade Irons
Securing blades to blade irons using washers and blade screws from the hardware bag.
Attaching Blade Arms to Motor
Lightly attaching blade arms to the motor with screws, then tightening them securely.
Assembling the Light Kit
Partial Screw Installation
Partially installing light kit assembly screws into the motor housing before attaching the kit.
Wire Plug and Connector Assembly
Feeding wire plugs and connecting pin connectors between the fan, housing, and light kit.
Final Light Kit Tightening
Turning the light kit counterclockwise to seat screws and tightening all screws securely.
Installing the Globe
Bulb Installation
Installing the provided bulbs into the light kit sockets.
Globe Alignment and Attachment
Aligning globe notches with light kit tabs and attaching by turning clockwise until secured.
Installing the Pull Chains
Pull Chain Attachment
Attaching pull chain pendants to the light and fan pull chains for speed and light control.
Fan Speed and Light Control
Using pull chains to select fan speed (with beeps) and turn the light fixture on or off.
Reversing the Fan Direction
Changing Fan Rotation
Procedure to change fan direction (downdraft/updraft) by pulling the fan chain.
Winter Mode Operation
Updraft (counterclockwise) for circulating warm air downwards.
Summer Mode Operation
Downdraft (clockwise) for creating a direct breeze and cooling effect.
Troubleshooting Fan Issues
Fan Not Working
Steps to diagnose and fix issues when the fan does not turn on.
Noisy Operation
Troubleshooting tips for common noise issues like unbalanced or cracked blades.
Excessive Wobbling
Resolving wobbling by checking blade installation and hanger ball seating.
Fan Movement During Start-up
Explanation of normal DC motor start-up movement and its energy-saving benefits.
Limited Lifetime Warranty Information
Obtaining Warranty Service
Instructions on how to obtain warranty service, requiring proof of purchase.
Warranty Coverage Details
Outlines what the motor and other parts warranties cover, including limitations.
Warranty Exclusions
Lists items and conditions not covered by the warranty, like labor and cosmetic damage.
State Law and Implied Warranties
Explains how state laws affect warranty coverage and implied warranty durations.
Downrod Installation Alternative
Installing an Accessory Downrod
Step-by-step guide for replacing the standard downrod with a different length accessory downrod.
Need help?
Do you have a question about the Anisten 52775 and is the answer not in the manual?
Questions and answers