Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Energy zeroCO2 Island 6 kW Twin
Summarization of Contents
Quick Guide
First start up
Initial steps to power on and operate the inverter for the first time.
Safety instructions
Safety standards
Details essential safety guidelines and cautionary measures for unit operation.
Introduction
Features
Lists the key capabilities and characteristics of the zeroCO2 Island inverter.
Basic System Architecture
Illustrates the typical system components and their connections for operation.
Product Overview
Provides a visual and labeled breakdown of the inverter's external components.
Installation
Unpacking and Inspection
Instructions for checking package contents and inspecting the unit for damage.
Preparation
Steps to prepare the inverter for electrical connections, including cover removal.
Mounting the Unit
Guidelines for selecting an installation location and mounting the inverter securely.
Battery Connection
Procedures and specifications for connecting the battery to the inverter safely.
AC Input/Output Connection
Detailed steps for connecting AC power input and output to the inverter.
PV Connection
Instructions for connecting photovoltaic (PV) modules to the inverter.
PV Module Selection
Criteria and parameters for choosing compatible PV modules for the inverter.
Final Assembly
Steps to complete the physical installation after all connections are made.
Communication Connection
Guides for establishing communication via Serial, Wi-Fi, and BMS interfaces.
Dry Contact Signal
Explains the function and usage of the dry contact signal for alerts.
Operation
Power ON/OFF
Procedure for turning the inverter unit on and off.
Operation and Display Panel
Overview of the inverter's control panel, including keys and display elements.
LCD Display Icons
Explains the meaning and function of various icons shown on the LCD display.
LCD Setting
Details on configuring inverter settings via the LCD interface, including program options.
USB Function Setting
Instructions for using the USB port for firmware upgrades and data management.
LCD Display
Describes how to navigate and view different operational information on the LCD.
Operating Mode Description
Explains the different operational states and their corresponding LCD indicators.
Faults Reference Code
A list of error codes and their corresponding fault events for troubleshooting.
Warning Indicator
Explains warning codes, audible alarms, and icon flashing for system alerts.
Battery equalization
Details the function, application, and timing of battery equalization.
Appendix I: Parallel function
Introduction
Overview of the inverter's capability for parallel operation and its modes.
Mounting the Unit
Guidelines for installing multiple inverters in a parallel configuration.
Wiring Connection
Recommended cable sizes and connection procedures for parallel battery and AC wiring.
Parallel Operation in Single phase
Wiring diagrams and procedures for connecting two to nine inverters in single-phase parallel.
Support 3-phase equipment
Wiring configurations for supporting three-phase equipment with multiple inverters.
LCD Setting and Display
Explains how to configure AC output mode for different parallel operation scenarios.
Commissioning
Steps to commission parallel systems, including single-phase and three-phase setups.
Trouble shooting
Lists common fault events and solutions for parallel inverter systems.
Appendix II: BMS Communication Installation
Introduction
Explains the use of RJ45 cables for communication between inverters and lithium batteries.
Pin Assignment for BMS Communication Port
Details the pinout for the RJ45 BMS communication port on the inverter.
Lithium Battery Communication Configuration
Guides for configuring communication with different lithium battery types (IO, PYLONTECH, WECO, SOLTARO).
LCD Display Information
Explains how to view battery pack and group numbers on the LCD.
Code Reference
Lists reference codes displayed on the LCD related to battery communication status.
Appendix III: Wi-Fi Operation Guide
Introduction
Introduces the Wi-Fi module and WatchPower APP for remote monitoring.
WatchPower App
Information on downloading, installing, and requirements for the WatchPower mobile application.
Initial Setup
Guides for registering the Wi-Fi module and configuring the local Wi-Fi connection.
Wi-Fi Network settings
Steps to connect the Wi-Fi module to a local Wi-Fi router for internet access.
Diagnose Function
Instructions for using the diagnose function to troubleshoot Wi-Fi module issues.
Login and APP Main Function
How to log in to the WatchPower APP and navigate the main interface.
Devices
How to add or delete devices within the WatchPower APP's device list.
Device List
How to view and manage device information, including real-time status and settings.
Device Mode
Explains the different operational modes (Standby, Line, Battery) displayed on the APP.
Device Alarm and Name Modification
How to view alarm history and modify device names within the APP.
Device Information Data
Information on accessing basic, product, rated, history, and Wi-Fi module data.
Parameter Setting
Guides on how to activate features and configure various inverter parameters via the APP.
Need help?
Do you have a question about the zeroCO2 Island 6 kW Twin and is the answer not in the manual?
Questions and answers