Titling; Title Input Operation; Disc Title Input; Track Title Input - Tascam CD-RW900SL Owner's Manual

7 − Titling
IMPORTANT SAFETY PRECAUTIONS
Titles can be given to the disc and the tracks on the disc,
using the TEXT EDIT option on the TEXT sub-menu.
NOTE
After a new title is selected and entered on the disc,
TOC will light up on the display. If the power is turned
off, the TOC has not been recorded on the disc and

Title input operation

Follow the guidelines below to input titles on the screen.
Operate them when in the text edit mode.
It is more efficient to connect a keyboard for title input ( see
"Title input by keyboard" on page 31).
Select the type of character for input
Press the DISPLAY key on the unit or the remote control
to select from two different types of characters.
Lower case letters/code: no indication
Capital letters/code: CAPS
Input procedure
Rotate the MULTI JOG dial or the
control to get the desired characters on the display.
Push the MULTI JOG dial or press the
the remote control to enter.
To move the cursor position
Use the key and the
∆/˙
panel, or the key on the remote control.
SEARCH
To delete characters
Place the cursor on the character, then press the
key on the front panel, or the
ERASE/DEL
on the remote control.

Disc title input

1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see "Operation basic" on page
15). will appear.
T e x t > D i s c
2. Press the dial or the
MULTI JOG
remote control.
Now, you can input or edit the disc title following
the guidelines above.

Track title input

1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see "Operation basic" on page 15).
2. Rotate the MULTI JOG
keys on the remote control to select the track
SKIP
number you wish to title.
3. Push the MULTI JOG dial or press the
on the remote control.
Now, you can input or edit the track title following
the guidelines above.
0 0
TASCAM CD-RW900SL TASCAM CD-RW900SL
SKIP key on the remote
ENTER key on
key on the front
˚/¥
key
ERASE
key on the
ENTER
dial or repeatedly press the
ENTER key
the titles will not have be added. You must finalize
the disc to save the titles.
To insert characters
Move the cursor to the location where you wish to insert
a character, and press the
front panel or the
FINALIZE
To change a character
Place the cursor on the character to be changed, then
input the desired character.
NOTE
As with the TEXT menu, if you attempt to eject the
disc without writing the TOC to the disc, the display
will show . If you want to eject the disc
S u r e ? T e x t !
without performing a TOC write, press the EJECT key
while "Sure Text!" is shown on the display. The text
that have been edited or entered will be abandoned.
The disc or track title on a finalized disc cannot be
edited. Unfinalizing (CD-RW only) is needed in this
case to use the title input function.
3. Press the MENU key to enter.
If you want to cancel, press the
4. Press the key to enter.
MENU
If you want to cancel, press the
FINALIZE/INS key on the
key on the remote control.
STOP key.
STOP key.