Pioneer MEP-7000 Operating Instructions Manual page 18

CONNECTIONS
5. Connecting a computer
Make these connections in order to use the accessory DJS or other DJ software program.
Computer
NOTE
• Use only the furnished accessory USB cable.
6. Connecting the power cord
When all other connections have been completed, connect one end of the accessory power cord to the AC IN jack on the rear side of
the drive unit, and the other end to a normal AC power outlet, or the auxiliary power outlet of an amplifier.
18
En
Accessory Do not connect until you have installed the required driver
USB cable in your computer. See "ABOUT THE DRIVER PROGRAM"
(P .51).
Drive unit