Using The Utility; Setting Method; Settings - Pioneer MEP-7000 Operating Instructions Manual

USING THE UTILITY

USING THE UTILITY
When the UTILITY button is pressed, the UTILITY screen appears, allowing setting of various device parameters, creation of libraries, and
backup of user data.

SETTING METHOD

1 Use the function buttons to select the item you wish to set
[DISPLAY/CD-G/PC/BROWSE/LANGUAGE/GENERAL].
2 Rotate the rotary selector dial to align the cursor with the
desired setting item.
3 Press either the select down () button or the rotary selector
dial to move the  icon to the right side.
4 Turn the rotary selector dial to select the desired setting
value.
5 Press the rotary selector dial to confirm the new setting
value.
To cancel before confirming, press the select up () button.
62
En
Function buttons UTILITY
Rotary selector dial

SETTINGS

[1] DISPLAY
Brightness, external output settings, etc.
LCD BRIGHTNESS Sets brightness of center
OEL BRIGHTNESS Sets brightness of displays A/
LED BRIGHTNESS Sets brightness of LED (5
SCREEN SAVE
TV STANDARD
MONITOR OUT
*1 Screen saver operation
• The screensaver operates when five minutes have passed
• The screensaver also operates after 100 minutes passes
• Screensaver operation can be set for either normal style or
• The screen saver is disabled when a track is set with DJ
• During operation of the screensaver, pressing a button,
[2] CD-G
The CD-G karaoke mode can be selected (P. 61).
[3] PC
The MIDI channel can be set (P. 58).
Select down ( ) button
display (5 steps)
B (5 steps)
steps)
*1
After the set time without
user operation, the LCD and
OEL screens are dimmed in
order to preserve the
displays.
Sets signal format for
monitor output (PAL, NTSC
(7.5 IRE), NTSC (0 IRE)).
Sets center display aspect
ratio to LETTER BOX,
FULL SCALE, or OFF.
without a track being loaded in either controller.
without any button input when either one or both of the
controllers is in pause mode (including cue standby or END
display).
manipulator style connection.
software other than DJS.
inserting a disc, or performing any other command
operation will cancel the screensaver.
Factory
default setting
5
5
5
ON
NTSC (7.5
IRE)
OFF