Operating Reverb And Pitch Shifter - Pioneer DJM 3000 - Professional DJ Mixer Operating Instructions Manual

USING THE EFFECT FUNCTIONS

Operating Reverb and Pitch Shifter

Effector Settings
Effect
REVERB Reverb time (echo time)
Setting range: 1 to 100%,
PITCH Pitch
(Pitch Shifter) Setting range: 0 to ±100%,
Example: Display when music on CH-3 has been pitch-shifted 90%.
BPM display
Effect parameter/BPM display
H.P CUE switch
1 Set the Effect selector switch to PITCH.
2 Set the Effect CH. SELECT switch to 3.
÷ The Effect parameter/BPM display LED "3" will light.
* The entire BPM display will turn off.
3 Set the parameter value.
When the H.P CUE switch (in the BEAT EFFECTS
controls) is pressed, the effect can be confirmed by
listening to the headphones output.
Setting Pitch
÷ Pressing # on the Effect beat selector switch will
increase the pitch setting +33%, +50% or +100%,
while pressing @ will decrease it –33%, –50% or
–100%.
÷ More precise pitch can be set with the Effect
PARAMETER 1 control (TIME).
16
<DRB1314>
Effect Parameter 1 (TIME)
in 1% steps
in 1% steps
Effect Parameter 2 (LEVEL/DEPTH)
Effect mix ratio
(Balance between original and reverb sound levels)
Effect mix ratio
(Balance between original and pitch-shifted sound
levels)
Effect selector switch
Effect CH. SELECT switch
Effect PARAMETER 1 control
(TIME)
Effect PARAMETER 2 control
(LEVEL/DEPTH)
Effect ON/OFF switch
Setting the Balance Between Original and Pitch-
Shifted Sound Levels
÷ The balance between original and pitch-shifted sound
levels is set using the Effect PARAMETER 2 control
(LEVEL/DEPTH). Turning this control to the left will
decrease pitch-shifted sound and turning it to the right
will increase it.