Part Names And Functions; Top Panel - Denon DNS1200 - USB DJ CD Player Owner's Manual

Part Names and Functions

For buttons not explained here, see the page indicated in parentheses ( ).

Top Panel

Note that there are many buttons working two different function selected by short time pushing or long
pushing (1 second or more). The "⋅" mark indicates short time push function and "–" mark indicates long
time push function.
Q0 Q1 Q2
o
i
u
y
t
r
e
w
q
W8 W7

Q3 Q4 Q5 Q6 Q7
W6 W5 W4 W3
q
PLAY/PAUSE button (1 3)
• This button will start or pause playback.
• Push once to start playback, once again to pause
playback, and once more to resume playback.
w CUE/STUTTER button
⋅
CUE (Back cue):
Pushing this button in play mode will force
the file back to the position which playback
started. While in search mode, it makes new
Cue point.
⋅
Stutter:
In Cue mode, by pushing the
makes a Stutter sound from the Cue point. This
is called Stutter play.
e FILTER button
One of three filters (LOW PASS, MID PASS and
HIGH PASS) can be selected.
r FLANGER button
The depth and delay time can be selected.
t ECHO/LOOP button
The ECHO and LOOP functions can be selected.
The feedback level and delay time can be
Q8
selected. Looping for the delay time (ECHO
LOOP) is possible by setting the feedback level
Q9
to "MAX" .
y TAP , LOCK, -AUTO/INPUT BPM button
⋅
TAP:
When you push this button repeatedly, the
Auto mode turns off and starts measuring your
Beats Per Minute (BPM) by tapping.
⋅
BPM LOCK:
When this button is pressed once while the
Auto BPM counter is operating, the data
W0
measured by the Auto BPM counter is locked.
⋅
AUTO:
TAP
When pushing the button for 1 second,
activates AUTO BPM mode. The measured
BPM is displayed in the character section of
the display.
⋅
MANUAL INPUT:
W1 TAP
When the button is pressed and held in
for more than 2 seconds, the BPM input mode
is set and the BPM value can be input directly
W2
PARAMETERS
with the knob. When the
button is pressed again, the BPM input mode
is turned off.
NOTE
• If you select a new file, AUTO BPM mode turns
on automatically.
• BPM data can be saved to the MEMO function.
u
EXIT/RELOOP button
Use this to exit or return back again to Seamless
loop playback. You can add variety to looping
with this function.
i NEXT TRACK button, A/B TRIM buttons
When the button is pressed during playback,
the next track mode is selected. When pressed
during seamless looping, the mode for adjusting
seamless loop point A or B is set, and when
pressed again, the next track is set.
o FLIP/CLR button
CUE ⋅
button
FLIP:
Use this to select operating mode of
A2
buttons, from Hot Start mode and Stutter
mode.
The display will indicate "H/S" or "STR" .
⋅
A1, A2 CLR:
A1 A2
If the or buttons is pushed while pushing
FLIP
the button, you can clear the selected A
point.
By holding down just the
than 1 sec, you can clear A1 and A2 points all
at once.
Q0 A1, A2 button
Using this button you can create starting point
for Hot Start, Seamless Loop and Stutter.
Q1 B button
Use this to set the B point for to create a
Seamless Loop after the A point has been set.
TAP
A1
and
FLIP
button for more