Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Behncke SWT 100
Summarization of Contents
Important Basic Information
General Usage Guidelines
General usage instructions and emphasizes reading the manual before setup.
Warning Symbols and Signal Words
Explains warning symbols (Danger, Caution, Electrical Connection, Note) and their meanings for safe operation.
Copyright and Warranty Terms
Covers copyright protection and warranty terms according to German legal regulations.
Product Liability Disclaimer
States that errors are excepted and subject to technical changes.
Product Overview and Safety
Product Description and Intended Use
Details product quality, maintenance recommendations, and its exclusive use for pool heating.
Handling and Assembly Safety
Warns about edges, corners, and the need for trained specialists for assembly and maintenance.
Safety Dangers and Precautions
General Safety Warnings
Covers proper use, modifications, maximum pressure, and electrical connection safety requirements.
Specific Handling Dangers
Highlights risks like combustion from hot connections and contact corrosion from dripping water.
Installation Site Safety
Installation Environment Requirements
Specifies installation in frost-free rooms and adherence to pressure limits.
Regular Checks and Warnings
Advises checking for leaks and damage weekly, and warns about potential damage if guidelines aren't followed.
Accessories
Available Accessories
Lists available accessory products like pipe clamps, pumps, and valves with their item numbers.
Water Requirements
Water Quality Parameters
Specifies acceptable ranges for Chloride, Free chlorine, pH, Iron, Copper, Salt content, and Temperature.
Technical Data - QWT 100
QWT 100 Series Specifications
Details technical data including output, pump capacity, pressure loss, and item numbers for QWT 100 models.
Technical Data - SWT 100
SWT 100 Series Specifications
Details technical data for SWT 100 models, including output, pump capacity, and pressure loss.
SWT 100 Titanium Specifications
Presents technical data for SWT 100 Titanium models, focusing on high chloride content suitability.
Technical Data - WTI 100 & Supercharged
WTI 100 Series Specifications
Provides technical data for WTI 100 models, highlighting suitability for high chloride content water.
Supercharged Series Specifications
Details technical data for the Supercharged series, noting efficiency and calcification resistance.
Installation and Connection Dimensions
Transport and Storage Guidelines
Provides instructions for safely transporting and storing the heat exchanger when empty.
Installation
Installation Arrangement Above Water Level
Illustrates horizontal and vertical installation arrangements above the water level with minimum distance.
Installation Arrangement Below Water Level
Shows horizontal installation arrangements for the heat exchanger below the water level.
Connecting the Heat Exchanger
Connection to Circulation Pump / Filter System
Details connecting heating water to the primary side and pool water to the secondary side.
Connecting Specific Models to Filter System
Explains connecting QWT 100-140/100-209 and WTI 100-140/100-209 to a filter system.
Start-up Procedure
Pre-Start Checks and Actions
Emphasizes reading the manual, bleeding circuits, and ensuring shut-off valves are closed for maintenance.
Function and Maintenance
Heat Exchanger Functionality
Describes heat transfer principles for QWT, WTI, and SWT series, including SWT-T features.
Weekly Checks and Servicing
Recommends weekly checks for leaks and outlines procedures for storing the heat exchanger over winter.
Winter Storage Procedures
Storage in Frost-Free Rooms
Instructs to completely fill the heat exchanger with water when storing in frost-free environments.
Storage in Frost-Risk Areas
Details steps for storing without frost damage, including closing valves and draining.
Emptying and Storage Precautions
Describes emptying in vertical/horizontal positions and warns against storing near chemicals.
Diagnosing Malfunctions
Troubleshooting Common Issues
Provides a table for assessing issues like 'No output' or 'Lower output' and suggests remedies.
Removal and Disposal
Packaging Disposal
Advises disposing of packaging materials separately in household waste bins.
Heat Exchanger Removal and Disposal
Emphasizes safety during removal and disposal, recommending specialist handling and recycling.
Need help?
Do you have a question about the SWT 100 and is the answer not in the manual?
Questions and answers