Playing Files By Specifying A Server - Marantz AV8003 User Manual

PLAYING FILES BY SPECIFYING A SERVER

SPECIFYING A SERVER
In the following cases, you can use "Server" in the top
menu to play fi les and obtain a fi le list.
• When you want to specify one server from multiple
connected servers and play fi les from this server
• When you cannot obtain a fi le list from the Music,
Photo or Video menu on the connected server
1.
Select "Server" using the cursor on the top
menu and press the ENTER button, or press
the yellow (SERVER) button on any screen.
NETWORK
Music
Photo
Video
Server
Select Enter 1
ENTER
2.
The SERVER menu is displayed.
SERVER
1/1
1 Server
SERVER
xxxxxx
3
xxxxxx
2
MODEL NAME
xxxxxx
4
Select Enter Exit 1
ENTER
q Name of the server selected in e
w Type of the server selected in e
e Server list
r Number of servers that are currently detected
All servers from which fi le lists have been obtained in
the past are registered on the server list.
• White text:
Servers that are currently connected
• Gray text:
Servers that were connected in the past but are
not currently connected
3.
Select a server from the server list, and press
the ENTER button to display the fi le list of the
selected server on the screen.
Notes:
• The unit can register a maximum of 50 servers. If the
number of servers exceeds 50, delete servers that are
no longer required.
• The contents of the displayed server list vary
depending on the server.
• It may not be possible to play some fi les on the
server using this unit.
When the Server Supports WakeOnLAN
If a server displayed with gray text on the server list
supports WakeOnLAN, you can press the ENTER
button to start the server and display the fi les.
The dialog box below is displayed while the server
is starting.
Press the ENTER button again to abort the
connection.
Starting Server
Establishing Server connections
ABORT
After the server has started, you can display the
server fi les.
SERVER
1/4
xxxxxx
TITLE
Video
Video
SERVER
Music
xxxxxx
Photos
User Files
Select Enter Exit 1
ENTER
REFRESHING THE SERVER LIST
In the following cases, you can display the list
correctly by refreshing the server list.
• When a newly connected server is not automatically
registered on the server list
• When a server whose connection was canceled
remains on the server list
1.
Press the MENU button on the server list.
2.
When you select "Refresh" and press the
ENTER button, the unit obtains the server
information from the network again and
refreshes the server list.
DELETING UNNECESSARY SERVERS FROM THE
SERVER LIST
All servers that were recognized by the unit in the
past are registered on the server list.
If the history has grown larger than is necessary or
the list is full with 50 items, you can delete servers
that are no longer required from the server list.
1.
Select a server that is not currently connected
and press the MENU button.
2.
Select "Remove server" and press the ENTER
button.
3.
When the following dialog box appears, select
"OK" and press the ENTER button.
Remove Server
Push[OK]to remove this server from list
OK CANCEL
ENGLISH
15