BENDIX AIR DISC BRAKE-ADB22X-225-SN6-7-SK7 Manual page 21

6
101
short cable end
6. Press the wear indicator cable
(101) into the locating tabs of the
cable guide (105) (see arrows A). The
short cable end of the wear indicator
cable (101) must not be secured by
locating tabs of the cable guide (105).
According to vehicle type, install
the cable that leads to the electrical
supply of the vehicle, in one of the two
locating tabs (see arrows B).
8
7
105a
101
7. Install the indicator cable (101) in
the middle of the pad retainer (11).
Insert the cable guide (105a) at one
side of the pad retainer (11) (see
arrow B). Slightly press in on the
other side of the pad retainer (11) (see
arrows A). The cable guide (105a)
snaps into place.
According to vehicle type, install the
cable that leads to the electric supply
of the vehicle, in one of the wire loop
(see arrows C). The short end of the
wear indicator cable (101) must not
be secured by a wire loop of the cable
guide (105a) (see arrows C).
8. Carefully install the cable protection
plate (104) with attention to the correct
position of the cable protection plate's
catch (see arrows).
The cable protection plate (104) will
snap into place.
21