Install The Trailer Mounted Warning Light - BENDIX A-18 TRAILER ABS Manual

FIGURE 21 - Diagnostic Port Installation (Standard)
FIGURE 22 - Warning Light Location
To Frame
Diagnostic
Port
Diagnostic
Port Bracket
Install the Diagnostic Port (Standard System)
On standard systems, the diagnostic port is installed on
the road side of the trailer, on the frame forward of the
trailer axle(s). To install the diagnostics port, bolt or weld
the diagnostic port bracket to the trailer frame.

Install the Trailer Mounted Warning Light

The warning light is mounted on the road side of the trailer,
forward of the marker light according to the following
drawing.
23.6"
(600mm)
5.9"
(160mm)
Side Marker
A B S
ABS
Warning
Lamp
Rear
of
Trailer
Rear
17