Related Manuals for SOLIS S6-EH3P10K-H-AU
Summarization of Contents
Introduction to Solis S6 Series Inverter
Product Description and Capabilities
Describes the Solis S6 Series hybrid inverter and its capabilities for self-consumption.
Inverter Packaging Contents
Lists the components included in the inverter package.
Safety and Warning Guidelines
Understanding Safety Symbols
Explains the meaning of DANGER, WARNING, CAUTION, and NOTE safety symbols.
General Safety Instructions
Provides general safety instructions for connecting devices and handling the inverter.
Notice for Proper Use
Outlines the conditions and requirements for using the inverter correctly.
Product Disposal Notice
Provides instructions on how to dispose of the product responsibly.
Overview of Inverter Features
Intelligent LED Indicator Functions
Explains the function of various LED indicators on the inverter.
Inverter Installation Procedures
Selecting the Inverter Location
Provides criteria and recommendations for choosing an installation location for the inverter.
Mounting the Inverter
Details the requirements and clearance for mounting the inverter securely.
PE Cable Installation
Describes the procedure for connecting the protective earth (PE) cable to the inverter.
PV Input Cable Installation
Explains how to prepare and connect the DC input cables from the PV array.
Battery Power Cable Installation
Details the steps for connecting the battery power cables to the inverter.
AC Cable Installation
Provides instructions for connecting AC cables to the inverter.
Communication Cable Installation
Guides on installing communication cables and ports.
Meter Installation
Provides instructions for installing the smart meter and CT.
Inverter Remote Monitoring Connection
Details how to connect the inverter for remote monitoring via WiFi, LAN, or 4G.
External Residual Current Device (RCD)
Recommends installing an external Type-A RCD with a threshold higher than 100mA.
Max. Over Current Protection Device (OCPD)
Specifies the recommended OCPD ratings for AC grid connection protection.
Earth Fault Alarm
Explains how earth faults are indicated and the inverter's response.
Commissioning and Shutdown Procedures
Preparation of Commissioning
Lists essential checks and requirements before commissioning the inverter.
Commissioning Procedure
Outlines the step-by-step procedure for commissioning the inverter.
Startup Procedure
Details the steps to start up the inverter and the system.
Shutdown Procedure
Outlines the procedure for safely shutting down the inverter and system.
Australian Grid Code Settings
Explains how to select and configure Australian grid code settings.
Working Mode Settings
Describes the available working modes for Solis AU version inverters.
Power Rate Limit Settings
Explains how to set limits for power increase/decrease per minute.
Frequency Derate Settings
Details frequency response settings for frequency changes.
10-Minute Voltage Settings
Sets the 10-minute average overvoltage protection limit.
DRM Settings
Describes enabling or disabling the DRM port functionality.
Export Power Control
Explains the export power control function for compliance with AS/NZS4777.2:2020.
Inverter Firmware Version Check
Guides on how to check the inverter firmware version in the APP.
Inverter Maintenance
Maintenance and Cleaning Guidelines
Provides guidance on cleaning and maintaining the inverter for optimal performance.
Need help?
Do you have a question about the S6-EH3P10K-H-AU and is the answer not in the manual?
Questions and answers