Related Manuals for CAMSO 80 Series
Summarization of Contents
Foreword
Literature Information
Details on manual content currency and replacement.
Maintenance Intervals
Guidance on determining service intervals using hour meters or calendar dates.
Product Identification
How to find and understand the track system's model and serial numbers.
Safety Information
Important Safety Precautions
Essential safety rules for operating, servicing, or repairing the undercarriage.
General Information
Technical Description
Overview of TTS benefits: flotation, weight distribution, and reliability.
Track System Components
Identification and terminology of various track system parts with a diagram.
Specifications and Dimensions
Technical data including track width, height, length, and load capacity.
Operational Guidelines
Minimum Turning Radius
Recommended turning radius limits to prevent system damage.
Operating Procedures
General advice for safe and effective operation in various conditions.
Track Break-in Procedures
Steps for initial track usage to ensure longevity and performance.
Track System Installation
Handling the Track System
Safe methods for lifting and moving track systems.
Installation Steps
Detailed instructions for mounting the track system onto an implement.
Scheduled Maintenance
General Maintenance Information
Importance of proper use and regular inspection for TTS.
Lubricant Table
Chart listing recommended lubricants for various track system components.
Maintenance Schedule Overview
A comprehensive table of tasks based on operating hours or time intervals.
Daily Maintenance (10 Hours)
Daily checks and cleaning procedures to maintain track system.
Weekly Maintenance (50 Hours)
Weekly tasks including greasing of pivot points and carrier hubs.
Monthly Maintenance (100 Hours)
Monthly checks, focusing on track tension and wheel bolt torque verification.
Annual Maintenance (500 Hours)
Annual tasks such as repacking carrier roller bearings.
5-Year/2000-Hour Maintenance
Periodic replacement of idler and midroller hubs and pivots.
Routine Maintenance
Check Track Alignment
Procedure to check if the track system is running parallel.
Track Alignment Procedure
Detailed steps for adjusting track alignment using shims and bolts.
Track System Inspection
How to inspect track components for wear, debris, and damage.
Adjusting Track Tension
Information on factory pre-set tension and detensioning for track removal.
Track Removal
Step-by-step guide for safely removing the track from the undercarriage.
Track Installation
Step-by-step guide for safely installing the track onto the undercarriage.
Need help?
Do you have a question about the 80 Series and is the answer not in the manual?
Questions and answers