Related Manuals for CAMSO 70 Series
Summarization of Contents
Foreword
Literature Information
Manual contains latest information, subject to production changes.
Maintenance Intervals
Servicing intervals determined by hour meter or calendar intervals, whichever occurs first.
Camso Product Identification Number
PIN plates display model, manufacturing date, and sequence number for undercarriage identification.
Safety
Important Safety Information
Read manuals, understand hazards, use proper training and tools to prevent injury or death.
General Information
Technical Description
TTS machines on muddy/soft soils, reduces soil compaction, mounts on axle frame, maximizes performance.
Track System Components
Identifies key parts like idlers, midrollers, tensioner, frame, and carrier roller with a diagram.
Specifications and Dimensions
Details track width, overall height/length, ground contact area, and capacity for different TTS models.
Weight Limitations
Lists maximum operating weights for TTS series and warns about exceeding limits.
Transport Limitations
Provides speed and duration limits for transport, warning against heat damage from high speed.
Minimum Turning Radius Limitations
Advises observing turning radius limits to avoid track/system damage and stresses.
Operational Guidelines
Covers safe operation, track tension, surroundings, ground contours, width/height differences, and road use warnings.
Track Break-in Procedures
Explains how to reduce guide lug wear by using dry, dusty conditions for new tracks.
Track System Installation
Handling of the Track System
Describes how track systems can be handled using forklifts or hoists with textile bands.
Track System Installation
Details steps for cleaning the implement, moving it, raising tires, removing assemblies, and installing the track fitment axle.
Scheduled Maintenance
General Information
Emphasizes proper use, inspections, and maintenance for track system life and performance.
Lubricant Table
Lists lubricants and their viscosity grades for heavy mechanical components and oil bath hubs.
Maintenance Schedule
Provides a schedule for daily, weekly, monthly, annual, and 5-year maintenance tasks.
Daily Maintenance (Every 10 Hours)
Covers cleaning, inspection, and checking alignment and oil leaks for daily tasks.
Weekly Maintenance (Every 50 Hours)
Involves greasing upper carrier hubs, undercarriage, and pivot points.
Monthly Maintenance (Every 100 Hours)
Focuses on checking track tension, with a chart for recommended settings.
Annual Maintenance (Every 500 Hours)
Recommends repacking carrier roller wheel bearings and checking wheel bolt torque.
5-Year/2000-Hour Maintenance
Requires draining and replacing idler hubs, midroller hubs, and pivots.
Off Season Storage
Provides guidelines for storing TTS tracks indoors in a dry environment, avoiding sunlight and chemicals.
Routine Maintenance
Check Track Alignment
Details how to install stabilizer bars and measure inside distances for proper track alignment.
Track Alignment Procedure
Explains steps for adjusting track alignment by loosening/tightening cap screws and using shims.
Track System Inspection
Covers inspecting the track system, idlers, midrollers, guide lugs, track carcass, and tread for wear and damage.
Adjusting Track Tension
States tension is pre-set and provisions exist for detensioning for track removal.
Track Removal
Provides step-by-step instructions for safely removing the track from the undercarriage.
Track Installation
Details steps for installing the track onto the undercarriage, including lifting and positioning.
Need help?
Do you have a question about the 70 Series and is the answer not in the manual?
Questions and answers