Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Listen Technologies LP-4VP-072-01
Summarization of Contents
LR-3200 Quick Reference Guide
Power On/Off
Controls the unit's power state, turning it on or off.
Up/Down Volume Control
Adjusts the listening volume and can be used for channel selection.
Micro USB
Port for charging, programming, and firmware updates.
3.5 mm Output Jacks
Connects to headphones, ear speakers, or neck loop lanyards.
Belt Clip
Accessory for attaching the unit to clothing or a waistband.
Charging Contact
Enables charging via Listen charging tray options.
LED Indicator
Indicates unit status, battery level, and charging status.
Battery Protective Pull Tab
Activates internal battery connections upon removal.
Battery Door
Provides access to the battery and product labeling information.
Listentalk Safety Cautions
Hearing Safety
Advises on safe volume levels to prevent hearing damage.
Medical Device Safety
Consult physician before using with implantable or medical devices.
Recycling and Disposal
Instructions for proper disposal of equipment and batteries.
Quick Setup and Operation
Unit Unpacking
Inspect the unit for physical damage upon arrival.
Battery Activation
Remove the pull tab to engage battery connections.
Battery Charging
Fully charge the Lithium Ion battery using provided options.
Connecting Earphones
Connects the ear speaker or headphones via lanyard or extension cable.
Unit Power On/Off
Procedure for powering the receiver on and off.
Channel Selection Mode
How to select and save desired audio channels.
Volume Adjustment
Guides on setting a comfortable listening volume.
Battery and Belt Clip Features
Low Battery Indicator
Describes the LED indicator for low battery status and remaining usage.
Belt Clip Installation and Removal
Instructions for attaching and detaching the belt clip.
Battery Compartment Access
Steps to open the battery compartment for access.
Advanced Features and IDSP Software Suite
Super Quiet Mode
Noise reduction technology for improved audio quality.
Channel Modes Explained
Explanation of basic and expanded channel selection modes.
Auto Power Mode
Automatic power management when connected to charging devices.
Unit ID Management
Unique identifier for tracking and inventory control.
Default Volume Configuration
Sets the initial volume level upon powering on the unit.
Unit Information
Details extracted by software, including model, serial, and firmware.
Factory Default Reset
Restores the unit to its original factory settings.
Firmware Update
Checks for and installs the latest firmware for the receiver.
RF Reception Maximization Strategies
Maximizing RF Signal Strength
Strategies for ensuring a strong and consistent signal from the transmitter.
Troubleshooting LR-3200 Receivers
No Receiver Power
Troubleshooting steps for a unit that will not turn on.
No Audio
Steps to resolve issues with no sound from the receiver.
Audio Distortion
Solutions for audio quality issues like distortion.
Signal Reception Issues
Guidance for when the receiver fails to detect a signal.
Tuning Issues
Troubleshooting for unclear or off-tune audio reception.
Cross-Brand Compatibility
Advice on using the compatibility chart for different transmitter brands.
Limited Reception Range
Tips for improving signal reception distance.
Restricted Channel Access
Explanation for why only certain channels may be accessible.
Battery Charging Problems
Steps to resolve issues with the unit not charging.
Powering with Wall Transformer
Instructions for powering the unit via a wall transformer.
Compliance and Regulatory Information
Regulatory Compliance
Details FCC, Industry Canada, and general compliance notices.
Need help?
Do you have a question about the LP-4VP-072-01 and is the answer not in the manual?
Questions and answers