Table of Contents
Advertisement
C H A P T E R
7 :
O P T I O N S
Parameter, #1, #2, #3
Trunk
Bchannel
ConId
Table 7.6: Description of the fields of a textual trace file for CAS/Robbed Bit protocols [AUDI01].
In the text file, there are two events which seem to be duplicated, but are
from different sources, which means that the event came from one source
and was sent to another. For example: EV_CAS_0_1 From_DSP and then the
same event From_Table, means DSP sends this event and Table receives it
later. [AUDI01]
7.4
Downloadables Construction Utility
7.4.1 Location
~\E1_T1 Utilities\TPDMUtil.exe, where "~" represents the OPERA™
installation directory.
7.4.2 Description
This utility can generate CAS protocol configuration files and Call progress
tones configuration files. These files are part of the board configuration that
is downloaded in the initialization process to the E1/T1 interface.
7.4.3 Operation
Generating call progress tones configuration file
file according to the instructions in Section 7.1. Now invoke TPDMUtil.exe
and press the "Process New File" button inside the "CallProgress Tones"
area. In the CallProgress Tones dialog, press the "Select File" button to select
the "ini" file to be converted (this automatically selects the output file to be
of the same name and path but with extension xxx.dat). Fill in the vendor,
version and version description fields and press the "Make File" button. The
last action generates the "dat" file in the same directory and with the same
name as the "ini" file.
Generating CAS protocol configuration file
protocol xxx.txt and xxx.h files according to the instructions in Section 7.2.
Copy them (at least the xxx.h file) to the same directory in which
TPDUtil.exe is located, and ensure that the two following files: CASSetup.h
and CPP.exe are located in the same directory. Now invoke TPDUtil.exe
and press the "Convert Files" button inside the "CAS files" area. In the
"Signaling Files" dialog press the "Select File" button to select the "txt" file to
be converted (this automatically selects the output file to be of the same
name and path but with extension xxx.dat). Fill in the vendor, version and
version description fields and press the "Make File" button. The last action
should generate the "dat" file in the same directory and with the same name
as the "txt" file. [AUDI01]
F O R
A D V A N C E D
comes from DSP or from User, the value will be as NONE.
The table's function parameters as in the protocol table.
The trunk number the event is associated with.
The B-Channel number the event is associated with.
The connection ID the event is associated with. The ConId
is related to the CallHandle.
46
U S E R S
- first construct an "ini"
- first construct the CAS
Advertisement
Table of Contents
