Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for PRODIS C25
Summarization of Contents
INTRODUCTION
1.1. WARNING
Provides important safety information for installation, use, and maintenance of the ice cube maker.
1.2. Reception of the Machine
Details how to inspect the packing and identify the machine's serial number and model.
INSTALLATION
2.1. Placing the Ice Maker
Guidance on optimal placement of the ice maker, including temperature and air flow considerations.
2.2. Levelling of the Ice Maker
Instructions on how to properly level the ice maker using adjustment legs.
2.4. Minimum Distance to Obstacles
Specifies required clearances around the machine for proper operation and service access.
2.5. Water Supply Connection
Details on connecting the water supply, including pressure requirements and water quality.
2.6. Drain Connection
Covers methods for connecting the machine's drain system.
2.6.1. Gravity Drain
Instructions for setting up a gravity drain connection, including hose size and gradient.
2.6.2. Drain Force Connection
Explains how to install a drain force system allowing horizontal and vertical drain runs.
2.5. Electrical Connection
Mandatory grounding and connection requirements for safe and proper electrical operation.
PRIOR CHECKING AND START-UP
3.1. Prior Checking
Checklist of essential items to verify before starting the ice maker for the first time.
3.2. Start-Up
Step-by-step guide for the initial start-up procedure after installation and prior checks.
CONTROL BOARD
4.1. Control Board
Explains the control board components, PCB connections, and LED signalling for status and alarms.
Dip Switches Setting
Configuration options via dip switches for ice production and water input timers, and alarm settings.
ALARMS
4.2. Alarms
Details on operational malfunctions detected by the system and their corresponding LED indications.
4.2.1 Safety High Pressure Switch
Information on the safety high pressure switch and its reset mechanisms.
4.2.2 Long Harvest
Details the condition for a long harvest alarm and its consequences.
4.2.3 Ice Production Cycle Timeout
Explains the ice production cycle timeout alarm and the machine's response.
4.2.4 Faulty Temperature Probe
Describes the alarm triggered by a faulty or disconnected temperature probe.
4.3 PCB Push Button Function
Explains the function of the PCB push button for different operational modes and wash cycle activation.
DRAIN FORCE
4.4.1 Sequence of Operation
Describes the operational sequence of the drain force system, including pump activation and water evacuation.
4.4.2 Control Board
Details the control board and LED signalling specific to the drain force pump operation.
MAINTENANCE AND CLEANING PROCEDURES
6.1. Cleaning Water Distribution System
Step-by-step guide for cleaning the water distribution system, including flushing and sanitizing.
6.2. Cleaning Water Distributor and Injectors
Instructions for disassembling and cleaning components of the water distributor and injectors.
6.3. Cleaning the Bins
Procedure for cleaning and sanitizing the ice storage bin using appropriate solutions.
6.4. Cleaning the Condenser
Instructions for cleaning the air and water condensers to ensure optimal performance.
6.5. External Cleaning of the Machine
Guidance on how to clean the exterior surfaces of the ice maker.
6.6. Water Leakage Checking
Procedure for checking water connections to prevent leaks and flooding during maintenance.
6.7. Maintenance Table
Schedule outlining recommended maintenance procedures and their frequency.
USER TROUBLESHOOTING GUIDE
7.1. General Questions
Addresses common problems and their potential causes and solutions for the ice maker.
7.2. Drain Force
Troubleshooting common issues related to the drain force system, such as flooding or pump operation.
Need help?
Do you have a question about the C25 and is the answer not in the manual?
Questions and answers