Table of Contents
Advertisement
Quick Links
The OptiFiber
module attaches to a Versiv
rugged, hand-held tester that lets you locate, identify, and
measure reflective and loss events in multimode and singlemode
fibers. Typical maximum test ranges are 35 km maximum at
1300 nm for multimode fiber and 130 km maximum at 1550 nm
for singlemode fiber.
Accessing the Product Manuals
This guide provides basic information to help you get started
using the tester. For more detailed information, see the latest
versions of the Versiv Series Users Manual and the Versiv Series
Technical Reference Handbook provided on the Fluke Networks
website.
Symbols
Warning or Caution: Risk of damage or destruction to
W
equipment or software. See explanations in the manuals.
X
Warning: Risk of fire, electric shock, or personal injury.
Warning: Class 1 or Class 2 lasers. Risk of eye damage
*
from hazardous radiation.
Consult the user documentation.
Do not connect this equipment to public communications
j
networks, such as telephone systems.
Conforms to the Appliance Efficiency Regulation
(California Code of Regulations, Title 20, Sections
1601 through 1608), for small battery charging
systems.
*4959156*
PN 4959156, January 2018
2018 Fluke Corporation
All product names are trademarks of their respective companies.
OptiFiber
Getting Started Guide
Pro Optical Time Domain Reflectometer (OTDR)
®
or Versiv 2 main unit to make a
™
Pro
®
OTDR
Advertisement
Table of Contents
Related Manuals for Fluke OFP2-100-Q
Summarization of Contents
Symbols
Safety Warnings and Cautions
Covers general safety, electrical, fire, laser, and eye protection warnings.
Operational and Compliance Symbols
Includes symbols for user documentation, network connection, and efficiency regulations.
Safety Information
General Safety Precautions
Details safe handling, power usage, battery management, and environmental considerations.
Laser Safety
Provides specific warnings and precautions for operating Class 1 and Class 2 laser products.
Product Damage Caution
Highlights precautions to prevent damage to the product or test cables and data loss.
Connectors, Keys, and LEDs
Physical Interface Descriptions
Identifies and describes the main connectors, buttons, and indicator lights on the device.
How to Do an OTDR Test
Powering the Tester
Instructions on charging the battery and powering on the OptiFiber Pro.
Configuring Test Settings
Guides on selecting test type, fiber type, wavelengths, and test limits.
Compensate for Launch and Tail Cords
Details the recommended procedure for setting up launch and tail cords for accurate loss measurement.
Performing the OTDR Test
Steps for connecting the tester and initiating an OTDR test after setup.
Examine the Results
OTDR Results Formats
Explains the three viewing formats for OTDR results: EventMap, TABLE, and TRACE.
Saving Test Results
Procedure for saving test results, including entering cable IDs and project selection.
Need help?
Do you have a question about the OFP2-100-Q and is the answer not in the manual?
Questions and answers