Related Manuals for Ekol Clarity Double Sided
Summarization of Contents
OPERATING INSTRUCTIONS
Clean Air Act 1993 - Smoke Control Areas
Information regarding suitability for use in smoke control areas and relevant legislation.
FUEL
Guidance on suitable fuels, moisture content, and prohibitions for stove operation.
STOVE CONTROLS
Air Inlet Areas
Description of the three sets of air inlet areas: Primary, Secondary, and Tertiary air controls.
LIGHTING THE FIRE
Preparation Before Lighting
Ensuring chimney suitability, ventilation, and correct installation before first use.
Initial Paint Curing
Essential 'tempering-in' instructions to avoid damage to stove castings and paint finish.
Refuelling
Refuelling Procedure
Step-by-step instructions for adding fuel to maintain combustion and efficiency.
Refuelling on to a low fire bed
Procedure for adding fuel when the fire bed has insufficient embers to prevent smoke.
CLEANING/MAINTENANCE
Step by step maintenance instructions
Detailed procedures for annual flue cleaning, baffle plate inspection, firebrick checks, and glass cleaning.
Baffle Plate Position
Baffle Plate Position (Clarity 5, 8 and 12)
Diagrams showing correct placement of baffle parts A and B.
Baffle Plate Position (Clarity Vision Only)
Diagram showing correct placement of baffle on tertiary air bar.
Baffle Plate Position (Clarity Double Sided Only)
Diagram showing baffle plates on flat bars in front of tertiary cross bar.
Troubleshooting Solutions for Stove Problems
Stove is difficult to light / keep lit
Common causes and solutions for ignition problems, including damp fuel and poor draught.
Fuel burns too quickly
Common causes and solutions for rapid fuel consumption, including chimney draught and fuel type.
Smoke comes back into room
Common causes and solutions for smoke entering the room, such as air supply and chimney blockages.
Glass gets dirty quickly
Common causes and solutions for dirty glass, including airwash operation and fuel quality.
Not enough heat being produced
Common causes and solutions for insufficient heat output, related to fuel, draught, and air supply.
Too much heat in room
Common causes and solutions for excessive room temperature, including chimney draw and air supply.
Grate deformed / Baffle plate deformed
Causes and solutions for deformed grate or baffle plate, often due to high temperatures or incorrect fuel.
Need help?
Do you have a question about the Clarity Double Sided and is the answer not in the manual?
Questions and answers