Table of Contents
Advertisement
Chapter VI
Mail : When all installed HDD disks are full, the log is sent to the selected e-mail
Call Back : When HDDs are full, the log is sent to the selected IP address.
Log : Selects to save Log writing when installed HDDs are full.
(It is not recorded on the system Log, but used for event search.)
3
Disk Error : Shows data error on all of the HDDs installed. (Additional function soon)
Enable Disk Error : When there is a disk error, it is linked to action.
4
Remote Set Up <Disk Error (Disk Action)>
Alarm Time : Sets Alarm output time (Max 30 second)
Buzzer Time : Sets buzzer output time (Max 30 second)
Mail : When HDD error occurs, the log is sent to the selected e-mail
Call Back : When HDD error occurs, the log is sent to the selected IP address.
Log : Selects to save Log writing when HDD error.
(It is not recorded on the system Log but used for event search.)
SMART
5
Enable SMART : Select to use SMART feature.
SMART Function??
It checks the physical errors and observes the HDD disk continuously such as
Temperature, I/O device errors and general conditions of the HDD disk.
Popup Camera :
Not available at this moment
Popup Time :
Not available at this moment
Link Alarm :
Selects Alarm to be linked when HDD
error.
※ ※ ※ ※ Multiple selection possible
78
Advertisement
Table of Contents
