OPTICOM DIGITAL VIDEO RECORDER 2 - V 1.3 Operation Manual page 74

Chapter VI
2
Remote Set Up <Sensor (Link Record)>
Pre Record : Sets up pre recording time. (Max 5 second)
Post Record : Sets up post recording time. (Max 60 second)
Remote Set Up <Sensor (Link Action)>
3
Alarm Time : Selects Alarm output time. (Max 30 second)
Buzzer Time : Selects buzzer output time. (Max 30 second)
Mail : When sensor is detected, the log is sent to the selected e-mail.
Call Back : When sensor is detected, the log is sent to the selected IP address
Log : Item to save Log writing when sensor detected
(It is not recorded on the system Log but used for event search.)
Link Camera :
Selects which channel to record when
sensor is detected on the relevant
channel.
※ ※ ※ ※ Multiple selection possible Multiple selection possible Multiple selection possible Multiple selection possible
Popup Camera :
Selects which channel to Popup when
sensor is detected on the relevant
channel.
※ ※ ※ ※ It works when the Popup setting is It works when the Popup setting is It works when the Popup setting is It works when the Popup setting is
Yes Yes Yes' on DVR on DVR. on DVR on DVR
'Yes
Popup Time :
Selects Popup time.
Link Alarm :
Selects Alarm to be linked when sensor
is detected.
※ ※ ※ ※ Multiple selection possible Multiple selection possible Multiple selection possible Multiple selection possible
74