Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-KIS101-P/SURFACE
Summarization of Contents
Legal Information
About this Manual
Instructions for using and managing the product, subject to change without notice.
Trademarks
Hikvision's and other companies' trademarks and logos.
Disclaimer
Limitation of liability for product use, including hardware, software, and firmware.
Symbol Conventions
Danger Symbol
Indicates a hazardous situation with potential for death or serious injury if not avoided.
Caution Symbol
Indicates a potentially hazardous situation causing equipment damage or data loss if not avoided.
Note Symbol
Provides additional information to emphasize or supplement important points of the main text.
Safety Instruction
Warning Statements
Electronic operations must comply with safety and fire regulations; use proper power adapters.
Caution Statements
Avoid physical shock, extreme temperatures, dust, moisture, and direct sunlight.
Regulatory Information
FCC Information and Compliance
Compliance with FCC rules for Class B digital devices, avoiding harmful interference.
FCC Conditions for Operation
Device must not cause harmful interference and must accept received interference.
EU Conformity Statement
CE Marking and Directives
Product marked with CE, complying with European standards (EMC, RE, RoHS).
WEEE Directive Compliance
Proper disposal and recycling of electronic waste in the EU.
Battery Directive Compliance
Handling of batteries, proper recycling, and disposal in the EU.
Industry Canada ICES-003 Compliance
ICES-003 and RSS Standards
Compliance with Canadian standards for radio devices, subject to interference conditions.
Antenna and Transmitter Regulations
Transmitter operation with approved antennas and gain for successful communication.
1 About this Manual
Manual and Software Download
Download manual and software from the official Hikvision website.
2 Appearance Description
2.1 Door Station Appearance
Visual identification and description of the door station components and ports.
2.2 Indoor Station Appearance
Visual identification and description of the indoor station's front panel features and buttons.
Indoor Station Rear Panel
Visual identification and description of the indoor station's rear panel components and ports.
3 Terminal and Wiring Description
3.1 Terminal Description
Details of terminal connections for the door station, including types, names, and descriptions.
Indoor Station Terminals
Details of terminal connections for the indoor station, including types, names, and descriptions.
3.2 Wiring Description
Instructions and diagrams for connecting system components.
3.2.1 Door Lock Wiring
Instructions for connecting magnetic or electric locks to the door station.
Electric Strike Wiring
Wiring diagram and instructions for connecting an electric strike to the door station.
Magnetic Lock Wiring
Wiring diagram and instructions for connecting a magnetic lock to the door station.
3.2.2 Door Contact Wiring
Wiring instructions for connecting door contact sensors to the door station.
3.2.3 Exit Button Wiring
Wiring instructions for connecting an exit button to the door station.
3.3 Typical Application
Illustrates a typical system setup with multiple door and indoor stations.
4 Installation
4.1 Door Station Installation
Procedures and options for installing the door station on walls or with junction boxes.
4.1.1 DIP Switch Settings
Configuration of DIP switches for door station address and unlock duration.
4.1.2 Accessory Introduction
Details on required accessories like junction boxes, gang boxes, and mounting plates.
4.1.3 Surface Mounting without Gang Box
Step-by-step guide for surface mounting the door station without using a gang box.
4.1.4 Flush Mounting with Junction Box
Step-by-step guide for flush mounting the door station using a junction box.
4.1.5 Flush Mounting with Gang Box (Type I)
Step-by-step guide for flush mounting the door station with a Type I gang box.
4.1.6 Flush Mounting with Gang Box (Type II)
Step-by-step guide for flush mounting the door station with a Type II gang box.
4.2 Indoor Station Installation
4.2.1 Configure Ringtone
Configuration of DIP switches on the indoor station to set the ringtone.
4.2.2 Wall Mounting
Instructions and considerations for wall mounting the indoor station.
5 Local Operation
Communication Features
How to initiate and manage calls between door and indoor stations.
Door Unlock Functionality
Instructions for unlocking doors remotely from the indoor station.
Live View Operation
How to view the live feed from the door station on the indoor station.
Volume Adjustment
How to adjust the volume of the indoor station.
A. Cables
Cables and Wiring Guidelines
Guidelines and restrictions for selecting and routing cables for system connection.
Door Station Device Installation
Installation requirements for door stations, power supply, and connection to distributor.
B. Communication Matrix and Device Command
Communication Matrix Access
QR code to access the device communication matrix for Hikvision devices.
Device Command Access
QR code to access common serial port commands for Hikvision devices.
Need help?
Do you have a question about the DS-KIS101-P/SURFACE and is the answer not in the manual?
Questions and answers