Tv Components; Package Contents; Tv Front And Side Controls - Insignia NS-19E320A13 User Manual

Insignia 19"/22" LED TV
3 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M4 screws.
3.94 in. (100 mm)

TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand with screws (4)
• Quick Setup Guide
• Important Information

TV front and side controls

# Item
Wall-mount brackets
1
Remote control sensor
2
Power indicator
3
MENU
4
INPUT
5
VOL+/VOL–
6
CH
7
(power)
www.insigniaproducts.com
Description
Receives signals from the remote control. Do not block.
Lights red when your TV is in standby mode. For more
information, see "Turning your TV on or
page 22.
Press to open the on-screen menu. For more
information, see "Navigating the
Press to open the INPUT SOURCE list, press CH
CH to select a video input source, then press
VOL+ or VOL–. For more information, see
the video input source" on page 22.
Press to increase or decrease the volume.
Press to go to the next or previous channel in the
channel list. For more information, see
/CH
channel" on page 23.
Press to turn your TV on or off (standby mode). When
your TV is off, power still flows through it. To
completely disconnect power, unplug the power cord.
MENU
INPUT
VOL
CH
off" on
menus" on page 23.
or
"Selecting
"Selecting a
5