Insignia NS-19E320A13 User Manual page 14

Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 1 (DVI) jack on the side of your TV.
Back of TV
DIG ITA L V G A P C /DV I A U DIO
/
O U T P U T
P C I N
AU DIO O U T
( C O AXIAL )
Cable or satellite box
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO jack on the back of your TV
and to the AUDIO OUT jacks on the cable or
satellite box.
Note
When you connect the audio using the
PC/DVI AUDIO jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 20.
10
Side of TV
AN T /
C AB L E I N
HDMI cable with
HDMI-DVI adapter
www.insigniaproducts.com
NS-19E320A13/NS-22E340A13 Insignia 19"/22" LED TV
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y/P
video jacks on the side of your TV and the
component video out jacks on the cable or
satellite box.
Cables are often
color-coded to match
color-coded jacks.
Cable or satellite box
4 Connect an audio cable (not provided) to the
L/R AUDIO jacks on the side of your TV and to
the audio out jacks on the cable or satellite TV
box.
Note
• The COMPONENT IN video jacks share the
audio jacks with the AV IN VIDEO jack.
• When you connect the audio using the L/R
AUDIO jacks, the audio output is analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 20.
/P
B R
Side of TV