Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Riello RDB3.2 MP 140-160
Summarization of Contents
Declaration
Declaration of conformity in accordance with ISO / IEC 17050-1
Statement of conformity with international standards and European directives.
Information and general warnings
Information about the instruction manual
Guidance on the proper use, importance, and content of the instruction manual.
Guarantee and responsibility
Manufacturer's warranty terms and conditions for the product.
Guidance for the use of bio fuel blends up to 30% where gas oil use is permitted by the appliance Manufacturer
Instructions and considerations for using bio fuel blends with the burner.
Safety and prevention
Introduction
General overview of safety principles and potential dangers in burner operation.
Safety warnings
Specific warnings and precautions related to burner operation and safety.
Basic safety rules
Fundamental safety guidelines for operating and maintaining the appliance.
Personnel training
Requirements for qualified personnel and user responsibilities for safe operation.
Technical description of the burner
Technical data
Specifications and performance data for the burner models.
Burner description
Identification and description of the burner's main components.
Burner equipment
List of components and accessories included with the burner.
Burner dimensions
Physical dimensions and flange specifications of the burner.
Firing rates
Performance curves showing burner output versus combustion chamber pressure.
Installation
Notes on safety for the installation
Crucial safety instructions to follow before and during installation.
Handling
Safe procedures for moving and handling the burner during installation.
Preliminary checks
Essential checks before installation, including consignment and burner identification.
Installer/Servicer notes for the use of Gas oil with Bio blends up to 30% where gas oil use is permitted by the appliance Manufacturer
Specific guidance for installers regarding bio fuel usage and compatibility.
Working position
Acceptable and forbidden operating positions for the burner.
Boiler fixing
Procedures and precautions for mounting the burner onto the boiler.
Burner assembly
Steps for assembling the burner, including air intake connections.
Hydraulic systems
Fuel supply
Information on the fuel supply system, including pump operation.
One pipe system
Details on single-pipe fuel supply configurations and priming.
Two pipe system
Details on two-pipe fuel supply configurations and priming.
Electrical system
Notes on safety for the electrical wiring
Essential safety precautions for electrical connections and wiring.
Electrical wiring
Wiring diagrams and instructions for connecting the burner's electrical components.
Start-up, calibration and operation of the burner
Notes on safety for the first start-up
Safety guidelines for the initial commissioning and start-up of the burner.
Combustion adjustment
Procedures for adjusting combustion parameters and checking emissions.
Nozzles installation
Guidelines for installing and replacing burner nozzles for optimal performance.
Pump pressure
Factory settings and checks for the pump pressure for kerosene operation.
Maintenance position
Steps to access components for maintenance by moving the burner to a specific position.
Air damper adjustment
Instructions for adjusting the air damper for optimal combustion.
Electrodes setting
Guidance on setting the position of ignition electrodes.
Combustion head setting
Procedure for adjusting the combustion head for optimal flame adhesion.
Burner start-up cycle
Diagrams illustrating the normal and fault start-up sequences of the burner.
Maintenance
Notes on safety for the maintenance
Critical safety precautions before performing any maintenance tasks.
Maintenance programme
Overview of the recommended maintenance schedule and procedures.
Need help?
Do you have a question about the RDB3.2 MP 140-160 and is the answer not in the manual?
Questions and answers