Advertisement

User Guide
Rev 8
September 2021
AMS Trex
Device Communicator
User Guide
1.800.561.8187
information@itm.com
www.
.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TREXCHPKL9S1 and is the answer not in the manual?

Questions and answers

Summarization of Contents

AMS Trex Device Communicator User Guide
User Guide Overview
Provides an overview of the user guide's scope, content, and target audience.
Documentation Conventions
Explains the conventions used in the manual, such as notes, cautions, and warnings.
Technical Support Information
Details how to obtain technical support and what information to provide.
AMS Trex Device Communicator Overview
Trex Unit Precautions
Lists essential precautions to follow before operating the Trex unit.
Trex Unit Front View
Identifies and describes the components visible on the front of the Trex unit.
Trex Unit Touchscreen Operation
Details how to interact with the touchscreen, including gestures and calibration.
Trex Unit Power Module
Details the rechargeable Lithium-Ion power module, its operation, and care.
Powering the Trex Unit On or Off
Explains the procedures for powering the Trex unit on and off.
Trex Unit Settings
Covers viewing and modifying settings for the Trex unit and its applications.
Field Communicator Application
Automatic Device Detection
Explains how the Field Communicator automatically detects connected devices.
Device Connection Wizard
Guides users through connecting to devices by asking relevant questions.
Connecting to HART Devices
Details how to connect the Trex unit to HART devices for communication.
Offline HART Configurations
Covers creating, editing, copying, deleting, and renaming HART configurations offline.
Connecting to FOUNDATION Fieldbus Devices
Details how to connect the Trex unit to FOUNDATION fieldbus devices.
Loop Diagnostics Application
Loop Diagnostics Screen Overview
Describes the three sections of the Loop Diagnostics screen.
Powering Transmitters and Positioners
Explains powering devices for bench setup, isolation, or continuity checks.
Voltage and Current Measurements
Details how the Trex unit reads voltage and current in various configurations.
Performing Loop Checks
Explains using Loop Diagnostics for measuring and controlling current for loop checks.
Fieldbus Diagnostics Application
Fieldbus Diagnostics Overview Screen
Describes the home screen, its displayed statuses, and configuration options.
Interpreting Fieldbus Measurement Status (GOOD, BAD, CHECK)
Explains the GOOD, BAD, and CHECK labels and how to adjust measurement criteria.
Measuring Fieldbus Voltage, Noise, and Signal
Describes measuring key parameters and viewing their status (GOOD, BAD, CHECK).
Saving Measurements to Log File
Explains saving measurements to a log file for trend analysis and reporting.
Troubleshooting Fieldbus Diagnostics
Provides guidance for troubleshooting BAD or CHECK measurement readings.
Troubleshooting HART Communication Issues
Troubleshooting Fieldbus Communication
Lists common fieldbus communication symptoms, causes, and solutions.
Technical Specifications
Physical Specifications
Lists specifications for the hardware, including weight, dimensions, and display.
Communication Module Specifications
Details specifications for the Device Communicator and Plus communication modules.
Environmental Specifications
Details operating temperature, humidity, altitude, and charging specifications.
Product Certifications
ATEX Certification
Lists ATEX compliance standards and certification number.
EMC Compliance
Details EMC compliance testing and specifications.
IECEx Certification
Lists IECEx certification number and hazardous area classification.
Wireless and Spectrum Approvals
FCC RF Exposure Information
Provides FCC RF exposure guidelines for body worn operation.
FCC Part 15 and Industry Canada Compliance
States compliance with FCC Part 15 and Industry Canada RSS standards.

Table of Contents

Save PDF