Table of Contents
Advertisement
Operation / Installation
This appliance shall be installed in accordance with:
• Manufacturer's Installation Instructions
• Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601
• Local Regulations and Municipal Building Codes including local OH&S requirements
This appliance must be installed, maintained and removed by an Authorised Person.
For continued safety of this appliance it must be installed operated and maintained
in accordance with the manufacturers instructions.
Manual
Rinnai Continuous Flow Water Heaters
To Suit Water Heater Models -
INFINITY 32
INFINITY 26
INFINITY 26i
INFINITY 20
INFINITY 16
INFINITY ENVIRO 32
INFINITY ENVIRO 26
B16
B20
B26
HD250e
HD200e
HD200i
HDC211e
HDC211i
REU-VRM3237WG
REU- VRM2626WG
REU-VRM2632FFUG
REU-VRM2024WG
REU-VRM1620WG
REU-KM3237WD
REU-KM2635WD
REU-VR1620WB
REU-VR2024WB
REU-VR2626WB
REU-VRM3237WC
REU-VRM2632WC
REU-VRM2632FFUC
REU-KM3237WDC
REU-KM3237FFUDC
This Appliance complies
with AS 3498:2009
SAI GLOBAL LIC. W208
Advertisement
Chapters
Table of Contents
Related Manuals for Rinnai HDC211i
Summarization of Contents
Regulatory Information and Hot Water Safety
Victorian Consumer Installation Requirements
Specific installation requirements for Victorian consumers regarding licensing and compliance.
Hot Water Safety Hazards
Highlights the severe risks of scalding from hot water, especially for vulnerable groups.
Rinnai Water Heater Features and Benefits
Smartstart Pre-Heat System
Details the Smartstart® system for pre-heating water, saving water and reducing wait times.
Optional Water Controller Features
Introduces optional controllers with features like bath fill, voice prompting, and clock.
Important Information and Usage Notes
Solar System Incompatibility
Rinnai continuous flow water heaters are incompatible with solar water heating systems.
Pre-Use Water Temperature Check
Emphasizes checking water temperature before use for safety, especially for children.
Flue Outlet Safety Precautions
Notes on steam discharge and keeping flammable materials clear of the flue outlet.
Controller Operation and Safety
Cleaning Water Controllers
Instructions on how to clean water controllers using a mild detergent and damp cloth.
Temperature Limits with Open Taps
Explains temperature lowering and inability to raise above 43°C when taps are open.
Kitchen Controller Safety Setting
Details the default 50°C setting when priority is transferred back to a Kitchen Controller.
On/Off Button Operation Warning
Warns against pressing the On/Off button while the 'In Use' indicator is illuminated.
Operation Without Controllers
Automatic Ignition and Extinguishing
Describes how the appliance ignites electronically when a tap is opened and extinguishes when closed.
Hot Water Safety Guidelines
Reiterates dangers of hot water and provides safety guidelines for use, especially with children.
Water Control Information and Temperatures
Factory Pre-set Delivery Temperatures
Lists factory pre-set temperatures and their adjustability by an authorised person.
50°C Compliant and Solar Model Settings
Notes that 50°C compliant and Solar models have sealed, unalterable temperature settings.
Water Controller Capabilities and Configurations
Available and Suggested Temperatures
Lists available temperature ranges for Kitchen and Bathroom controllers, with suggestions.
Universal vs Deluxe Controller Comparison
Compares Universal (temp only) and Deluxe (temp, bath fill, clock) controllers.
Maximum Water Controller Combinations
Details maximum number and combination of controllers that can be fitted to the system.
Universal Water Controller Operation
MC-91Q Controller Overview
Identifies key indicators and buttons on the MC-91Q Universal Water Controller.
Turning the Universal Controller On
Steps to turn the water controller on and prepare the system for hot water.
Adjusting Water Temperature
Instructions for setting and adjusting the desired water temperature using the controller.
Advanced Universal Controller Usage
Operating Multiple Universal Controllers
Guidance on operating multiple Universal controllers and transferring priority.
Transferring Control Priority
Explains how to transfer control priority between different water controllers.
Temperature Limits in Multi-Controller Setups
Details temperature lowering and inability to raise above 43°C when taps are open.
Deluxe Bathroom Water Controller Operation
BC-100V Controller Overview
Identifies key indicators and buttons on the BC-100V Deluxe Bathroom Water Controller.
Turning the Deluxe Bathroom Controller On
Steps to turn the Deluxe Bathroom controller on and prepare the system for hot water.
Deluxe Bathroom Controller Settings
Setting Sound Options
Instructions for adjusting voice prompt volume and audible tones on the controller.
Setting the Clock Display
Guide to setting the 12-hour AM/PM clock display on the controller.
Adjusting Water Temperature
Instructions for setting and adjusting the desired water temperature using the controller.
Deluxe Bathroom Controller Functions
Shower Saver / Bath Fill Operation
Details on using the Shower Saver/Bath Fill function for preset volumes and temperatures.
Setting Bath Fill Temperature and Volume
Steps to set the desired delivery temperature and water volume for the function.
Bath Fill Volume Recommendations
Recommendations for initial bath fill volumes and safety advice when filling a bath.
Advanced Deluxe Bathroom Controller Usage
Stopping Shower Saver / Bath Fill
How to stop the Shower Saver/Bath Fill function prematurely.
Shower Saver / Bath Fill Completion
Describes the events that occur when the Shower Saver/Bath Fill operation is completed.
Using Multiple Controllers with Deluxe Models
How to operate and transfer priority between multiple installed water controllers.
Deluxe Kitchen Water Controller Operation
MC-100V Controller Overview
Identifies key indicators and buttons on the MC-100V Deluxe Kitchen Water Controller.
Turning the Deluxe Kitchen Controller On
Steps to turn the Deluxe Kitchen controller on and prepare the system for hot water.
Setting Deluxe Kitchen Controller Sound Options
Instructions for adjusting voice prompt volume and audible tones on the controller.
Deluxe Kitchen Controller Settings
Setting the Kitchen Controller Clock
Guide to setting the 12-hour AM/PM clock display on the controller.
Adjusting Kitchen Controller Temperature
Instructions for setting and adjusting the desired water temperature using the controller.
Smartstart Pre-Heat Operation
Smartstart Pre-Heat System Overview
Explains the Rinnai Smartstart® module for pre-heating water in pipework.
Activating the Smartstart Pre-Heat Function
Step-by-step guide on how to activate the Smartstart® preheat function.
Troubleshooting Guide
Error Codes and Fault Remedies
Lists error codes displayed by the water heater and their corresponding remedies.
Troubleshooting Without Controllers
Provides fault diagnosis and remedies for units without water controllers.
Installation Manual Overview
General Installation Guidelines
General guidelines and regulations for installing Rinnai continuous flow water heaters.
Condensate Drain for REU-KM Models
Instructions for the proper installation and drainage of condensate from REU-KM models.
Water Controller Installation Procedures
Guidance on the installation of various Rinnai water controllers.
General Installation Requirements
Applicable Regulations and Standards
Lists applicable standards and regulations for appliance installation.
Applicable Models Scope
Specifies which Rinnai Continuous Flow Water heater models these instructions apply to.
Appliance Location Guidelines
Details requirements for locating external and internal water heater appliances.
Installation Details and Configurations
Pipe Sizing for Connections
Guidance on appropriate pipe sizing for gas and water connections.
Water Supply Pressure Requirements
Information on water pressure requirements and potential need for pressure limiting valves.
Hot Water Delivery Temperature Regulations
Local regulations and personal hygiene considerations for hot water delivery temperatures.
Installation Configurations with Limiting Devices
Describes configurations for installing appliances with or without temperature limiting devices.
Mounting and Service Connections
Appliance Mounting Instructions
Instructions on how to securely mount the water heater unit to a wall or structure.
Service Connection Points and Valves
Details required valves, unions, and fittings for water heater connections.
Horizontal Flue Terminal Clearances
Minimum Clearances for Horizontal Flues
Specifies minimum clearance distances for horizontal flue terminals from building elements.
Flue Obstructions and Multiple Installations
Horizontal Obstruction Guidelines
Details minimum horizontal clearance from building structures to prevent operation issues.
Multiple External Model Installation
Guidance on installing multiple external water heaters side-by-side.
Appliance and Controller Dimensions
Dimensions of Water Heaters and Controllers
Provides detailed dimensions for various Rinnai water heater models and controllers.
Co-Axial Flueing for Internal Models
FFU Flue System Installation
Instructions for installing Rinnai FFU flue components for internal models.
Condensate Drain Management (REU-KM Models)
Condensate Drain Pipe Considerations
Key considerations for the condensate drain pipe material and installation.
Condensate Drain Length and Direction
Specifies limits for condensate drain pipe length and changes in direction.
Condensate Drain Installation Details
Details on condensate drain line installation, discharge points, and pipe requirements.
Condensate Drain Scenarios
Interconnecting Condensate Drain Lines
Guidance on joining condensate drain lines from multiple water heaters.
Common Stack Condensate Discharge
Requirements for discharging condensate into a common stack in multi-storey buildings.
Tundish Drain Line Specifications
Specifications for drain lines connected to a tundish.
Condensate Drains in Freezing Areas
Advice on insulating drain pipes in areas prone to freezing.
Water Controller Installation
Rinnai Water Controller Compatibility
Introduces Rinnai water controllers as optional extras and compatibility notes.
Water Controller Positioning Guidelines
Guidelines for suitable locations and mounting heights for water controllers.
MC-100V Controller Placement Advice
Advice on positioning the MC-100V controller to avoid display visibility issues.
Fitting Water Controllers
Water Controller Cable Installation
Information on water controller cables, voltage, length, and alternative wiring.
Fitting the Universal MC-91Q Controller
Step-by-step guide for fitting the Universal water controller MC-91Q.
Optional MC-91Q Universal Controller Programming
Instructions for optional programming of the MC-91Q, including 4-controller activation.
Fitting Deluxe Water Controllers
Fitting the Deluxe Kitchen MC-100V Controller
Step-by-step guide for fitting the Deluxe Kitchen water controller MC-100V.
Fitting the Deluxe Bathroom BC-100V Controller
Step-by-step guide for fitting the Deluxe Bathroom water controller BC-100V.
Connecting Controller Cables to Water Heater
Connecting Communication Cables
Procedure for connecting water controller communication cables to the water heater.
Commissioning and Testing Procedures
Pre-Installation Testing Steps
Steps for testing the water heater and its functions after installation.
Delivery Temperature Verification
How to confirm delivery temperatures and information on '50°C Compliant' and 'Solar' models.
Commissioning Settings and Checks
Gas Pressure Setting Adjustments
Details on gas pressure regulator settings and when adjustments are needed.
Commissioning Checklist Usage
Guidance on using a commissioning check list to ensure correct installation and operation.
Optional Accessories
Common Accessory Types
Details on optional accessories like Recess Box, Pipe Cover, and Security Cage.
Need help?
Do you have a question about the HDC211i and is the answer not in the manual?
Questions and answers