Knowledge Base
Access to more detailed information for procedures and troubleshooting.
Adjust Lift Actuator
Step-by-step instructions for adjusting the lift actuator for proper incline function.
Anti-Slip Pads
Instructions for removing and installing anti-slip pads on the treadmill.
Bridge Weldment
Procedure for removing and installing the bridge weldment assembly.
Drive Motor
Instructions for removing and installing the drive motor, including pulley and belt.
Emergency Stop
Steps for removing and installing the emergency stop mechanism.
Ergo Bar
Instructions for removing and installing the Ergo bar assembly.
Front Roller
Procedure for removing and installing the front roller.
Heart Rate Sensors
Steps for removing and installing the heart rate sensors on the handgrips.
Home Switch
Procedure for removing and installing the home switch for incline calibration.
IEC Receptacle
Instructions for removing and installing the IEC power receptacle.
Leveler Assembly
Procedure for removing and installing the leveling feet for unit stability.
Lift Frame
Procedure for removing and installing the lift frame assembly.
Lift Motor
Detailed steps for removing and installing the lift motor.
Line Filter
Instructions for removing and installing the line filter.
Motor Cover
Instructions for removing and installing the motor cover.
Polar Receiver
Steps for removing and installing the Polar telemetry receiver.
Rear Roller
Procedure for removing and installing the rear roller.
Uprights
Procedure for removing and installing the treadmill uprights.
Need help?
Do you have a question about the Monthly and is the answer not in the manual?
Questions and answers