Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for RockShox Bluto RL
Summarization of Contents
RockShox Service
Part Preparation
Prepare components by removing from bicycle and cleaning exterior surfaces with mild soap and water.
Service Procedures
General cleaning of parts using isopropyl alcohol or RockShox cleaner and lint-free towels for internal surfaces.
Model Code Identification
Warranty and Trademark Information
Access warranty and trademark terms of use via links on the SRAM website for product support.
Parts, Tools, and Supplies
Required Parts
Lists specific RockShox service kits needed for different fork models and travel lengths.
Tools and Equipment
Covers common bicycle tools, RockShox specific tools, and necessary equipment for fork maintenance.
Lubricants and Fluids
Lists approved suspension oils, greases, and cleaning agents for servicing RockShox components.
Safety Instructions
General Safety Precautions
Always wear safety glasses and nitrile gloves. Use an oil pan to catch drips during suspension servicing.
Service Intervals and Specifications
Recommended Service Intervals
Outlines maintenance schedules based on service hours for optimal fork performance and longevity.
Record Your Settings
Use charts to record fork settings like air pressure and rebound/compression clicks before service.
Torque Values
Specifies torque values for critical components like bottom bolts, bottomless tokens, and top caps.
Oil Specifications
Oil Volume and Height Chart
Details specific oil volumes and oil heights for different Reba and Bluto fork models and travel configurations.
Exploded Views
Exploded View - Reba & Bluto RL\R\RCT3
Provides a detailed exploded view of Reba and Bluto fork internals for component identification.
Exploded Views
Exploded View - Reba 26
Displays an exploded view of the Reba 26 fork, illustrating internal components and their arrangement.
Lower Leg Maintenance
Lower Leg Removal Procedure
Step-by-step guide for safely removing the lower leg assembly, including air pressure release.
Lower Leg Service
50-Hour Lower Leg Service
Details the 50-hour service for cleaning and re-lubricating foam rings within the lower leg assembly.
Lower Leg Seal Service
200-Hour Lower Leg Seal Service
Outlines the 200-hour service for replacing wiper seals and foam rings in the lower leg.
Air Spring Service
Travel Change Adjustment
Instructions on adjusting fork travel by replacing the air spring shaft assembly.
Bottomless Token Installation
Guidance on adding or removing Bottomless Tokens to tune the fork's bottom-out resistance.
Damper Service
Motion Control DNA Damper Service
Detailed procedure for servicing the Motion Control DNA damper, including disassembly and cleaning.
Reba 26 Specific Service
Reba 26 Rebound Damper Service
Specific instructions for servicing the rebound damper assembly on Reba 26 forks.
Lower Leg Reassembly
Lower Leg Installation
Step-by-step guide for reassembling the lower leg, including oil injection and bolt tightening.
Need help?
Do you have a question about the Bluto RL and is the answer not in the manual?
Questions and answers