Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RockShox Reba RL
Summarization of Contents
RockShox Service
Part Preparation
Preparing the component for service, including removal and cleaning.
Service Procedures
General guidelines for performing service tasks on RockShox products.
Parts, Tools, and Supplies
Safety and Protection Supplies
Essential safety gear and cleaning materials for servicing suspension forks.
RockShox Tools
Specialized tools recommended by RockShox for fork maintenance and repair.
Common Tools
Standard bicycle and workshop tools required for servicing suspension forks.
Lubricants and Fluids
Approved greases, oils, and cleaners for RockShox suspension maintenance.
Recommended Service Intervals
Record Your Settings
Instructions for documenting fork settings before service for accurate restoration.
Torque Values
Specified torque settings for various components during servicing.
Lower Leg Removal
50/200 Hour Service
Steps for safely removing the lower leg assembly from the fork.
Lower Leg Service
50 Hour Service
Detailed procedure for the 50-hour maintenance of the lower leg.
Lower Leg Seal Service
200 Hour Service
Procedure for replacing wiper seals and foam rings in the lower leg.
Air Spring Service
Travel Change Adjustment
Modifying fork travel by replacing the air spring shaft assembly.
Bottomless Token Installation
Adding or removing tokens to tune bottom-out resistance and spring curve.
Motion Control DNA Damper Service
Damper Service
Steps for servicing the Motion Control DNA damper assembly.
Reba 26 Rebound Damper Service
Rebound Damper Service
Procedure for servicing the rebound damper specific to the Reba 26 model.
Lower Leg Assembly
Lower Leg Installation
Steps for reinstalling the lower leg assembly onto the fork.
Need help?
Do you have a question about the Reba RL and is the answer not in the manual?
Questions and answers