RockShox VIVID COIL 2025 Service Manual
  1. Manuals
  2. Brands
  3. RockShox Manuals
  4. Bicycle Accessories
  5. VIVID COIL 2025
  6. Service manual

RockShox VIVID COIL 2025 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2025+
Vivid Coil
SERVICE MANUAL
GEN.0000000007788 Rev A © 2024 SRAM, LLC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIVID COIL 2025 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RockShox VIVID COIL 2025

Summary of Contents for RockShox VIVID COIL 2025

  • Page 1 2025+ Vivid Coil SERVICE MANUAL GEN.0000000007788 Rev A © 2024 SRAM, LLC...
  • Page 2 SAFETY FIRST! We care about YOU. Please, always wear your safety glasses and protective gloves when servicing RockShox products. Protect yourself! Wear your safety gear! ⚠ WA RNING - PR ESSU RIZED D EV ICE Suspension products may contain pressurized air, nitrogen, springs, and oil.

  • Page 3: Rockshox Service

    Retaining rings must be fully seated in the retaining ring groove. Confirm the retaining ring is fully seated in the retaining ring groove after installation. Do not use vinegar of any type to clean any part of a RockShox suspension product. Vinegar can cause permanent damage to parts which can, over time, result in product structural failure.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS ROCKSHOX SERVICE ......................................3 SUSPENSION SAFETY PRECAUTIONS AND WARNINGS ..........................3 PART PREPARATION AND SERVICE PROCEDURES .............................5 PART PREPARATION ..............................................5 SERVICE PROCEDURES ..............................................5 MODEL CODE IDENTIFICATION ..........................................6 WARRANTY AND TRADEMARK ...........................................6 VIVID COIL - SERVICE, COIL SPRING REPLACEMENT, AND RESERVOIR UPGRADE ................7 PARTS, TOOLS, AND SUPPLIES ..........................................

  • Page 5: Part Preparation And Service Procedures

    P a r t P r e p a r a t i o n Remove the component from the bicycle before service. Disconnect and remove the remote cable or hydraulic hose from the fork or rear shock, if applicable. For additional information about RockShox remotes, user manuals are available at www.sram.com/service.

  • Page 6: Model Code Identification

    M o d e l C o d e I d e n t i f i c a t i o n Product model code and specification details can be identified with the serial number on the product. Model codes can be used to identify the product type, series name, model name, and product version associated with the production model year.

  • Page 7: Vivid Coil - Service, Coil Spring Replacement, And Reservoir Upgrade

    • RockShox Rear Shock IFP Puller • RockShox Vivid C1 Toolset Use ONLY RockShox, SRAM, and Maxima suspension oils/fluids and grease, unless otherwise specified. Use of any other lubricants can damage seals and decrease performance. Vivid Coil - Service, Coil Spring Replacement, and Reservoir Upgrade...

  • Page 8: Recommended Service Intervals

    R e c o m m e n d e d S e r v i c e I n t e r v a l s Regular service is required to keep your RockShox product working at peak performance. Follow this maintenance schedule and install the service parts included in each service kit that corresponds with the Service Hours Interval recommendation below.
  • Page 9 When replacing seals and o-rings, use your fingers or a pick to remove the seal or o-ring. Spray RockShox Suspension Cleaner or isopropyl alcohol on each part and clean with a shop towel. Apply grease to the new seal or o-ring.

  • Page 10: Exploded View

    E x p l o d e d V i e w 2 0 2 5 + ( C 1 ) V i v i d C o i l U l t i m a t e R C 2 T ( R S - V I V C - U L T - C 1 ) Adjuster - Low Speed Compression (LSC) 12.

  • Page 11: 2025+ (C1) Vivid Coil Ultimate Dh Rc2 (Rs-Vivc-Udh-C1)

    2 0 2 5 + ( C 1 ) V i v i d C o i l U l t i m a t e D H R C 2 ( R S - V I V C - U D H - C 1 ) Adjuster - Low Speed Compression (LSC) 12.

  • Page 12: 2025+ (C1) Vivid Coil Select+ Rct (Rs-Vivc-Selp-C1)

    2 0 2 5 + ( C 1 ) V i v i d C o i l S e l e c t + R C T ( R S - V I V C - S E L P - C 1 ) Adjuster - Low Speed Compression (LSC) 12.

  • Page 13: 2025+ (C1) Vivid Coil Select Rt (Rs-Vivc-Sel-C1)

    2 0 2 5 + ( C 1 ) V i v i d C o i l S e l e c t R T ( R S - V I V C - S E L - C 1 ) Lever - Threshold (Pedal) 12.

  • Page 14: 2025+ (C1) Vivid Coil Base R (Rs-Vivc-Bse-C1)

    2 0 2 5 + ( C 1 ) V i v i d C o i l B a s e R ( R S - V I V C - B S E - C 1 ) Adjuster - Hydraulic Bottom Out (HBO) 12.

  • Page 15: Shock Eyelet Service - Standard Eyelet

    If you are unable to remove the mounting hardware using your fingers, If you are unable to remove the mounting hardware using your fingers, use the RockShox rear shock bushing removal/installation tool. use the RockShox rear shock bushing removal/installation tool.
  • Page 16 Insert the threaded rod (A) through the shaft eyelet until the push pin Insert the threaded rod (A) through the shaft eyelet until the push pin (B) rests against the bushing pin. (B) rests against the bushing pin. Thread the large, open end of the catcher (C) along the rod until it rests Thread the large, open end of the catcher (C) along the rod until it rests on the end spacer.
  • Page 17 Unthread the catcher from the threaded rod. Unthread the catcher from the threaded rod. Remove the end spacer and bushing pin from the tool. Remove the Remove the end spacer and bushing pin from the tool. Remove the spacer from the bushing pin. spacer from the bushing pin.

  • Page 18: Eyelet Bushing Removal

    E y e l e t B u s h i n g R e m o v a l To replace damaged or worn out bushings, use the RockShox rear shock bushing removal/installation tool. Deluxe is pictured. Procedures are the same for Vivid Coil.
  • Page 19 Clean the eyelet. Clean the eyelet. Optional Upgrade (Bearing Mount Frame Only): Optional Upgrade (Bearing Mount Frame Only): Standard Eyelet to Bearing Mount: Proceed to Standard Eyelet to Bearing Mount: Proceed to Standard Eyelet to Bearing Mount Installation Standard Eyelet to Bearing Mount Installation. Eyelet Bushing Removal...

  • Page 20: Bushing Installation

    Apply a light layer of grease to the outside of the new eyelet bushing. Apply a light layer of grease to the outside of the new eyelet bushing. RockShox Dynamic Seal Grease The bushing installation procedure is the same for the standard shaft The bushing installation procedure is the same for the standard shaft eyelet and damper body eyelets.
  • Page 21 Unthread and remove the catcher. Remove the threaded rod and push Unthread and remove the catcher. Remove the threaded rod and push pin tool. pin tool. Wipe the grease from the eyelet and bushing. Wipe the grease from the eyelet and bushing. Bushing Installation...

  • Page 22: Bearing Mount Adapter Removal

    Place the bearing mount adapter socket onto the bearing. RockShox Bearing Mount Adapter RockShox Bearing Mount Adapter Socket Socket Unthread one bearing and remove it. Unthread one bearing and remove it. RockShox Bearing Mount Adapter Socket Bearing Mount Adapter Removal...
  • Page 23 Remove the other bearing mount adaptor from the eyelet. Remove the other bearing mount adaptor from the eyelet. Bearing Mount Adapter Removal...

  • Page 24: Shock Eyelet Service - Bearing Eyelet

    S h o c k E y e l e t S e r v i c e - B e a r i n g E y e l e t Replace the bearings if they are not spinning freely, or if they are making a creaking noise. B e a r i n g R e m o v a l - S h a f t E y e l e t Deluxe is pictured.
  • Page 25 Turn the shock over and repeat the bearing removal process. Turn the shock over and repeat the bearing removal process. Hammer / Bearing punch / Gauge pin Mallet 1/8" / 3 mm (OD) Clean the bearing bores. Clean the bearing bores. RockShox Suspension Cleaner Bearing Removal - Shaft Eyelet...

  • Page 26: Bearing Installation - Shaft Eyelet

    B e a r i n g I n s t a l l a t i o n - S h a f t E y e l e t Install a new bearing into one bearing bore, then clamp the eyelet and Install a new bearing into one bearing bore, then clamp the eyelet and bearing into a vise with vise blocks.
  • Page 27 Loosen the vise, and align the bearing press tool centered on the Loosen the vise, and align the bearing press tool centered on the bearing, then slowly tighten the vise. Check and confirm the bearing bearing, then slowly tighten the vise. Check and confirm the bearing press tool is centered and is not overlapping the bearing edge.
  • Page 28 Insert a new spacer into the eyelet, then install a new bearing into the Insert a new spacer into the eyelet, then install a new bearing into the other bearing bore. other bearing bore. Clamp the eyelet and bearing into a vise with vise blocks, then press Clamp the eyelet and bearing into a vise with vise blocks, then press the bearing into the bearing bore until it is flush with the eyelet.
  • Page 29 Loosen the vise, and align the bearing press tool centered on the Loosen the vise, and align the bearing press tool centered on the bearing, then slowly tighten the vise. Check and confirm the bearing bearing, then slowly tighten the vise. Check and confirm the bearing press tool is centered and is not overlapping the bearing edge.

  • Page 30: Service, Coil Spring Replacement, And Reservoir Upgrade

    S e r v i c e , C o i l S p r i n g R e p l a c e m e n t , a n d R e s e r v o i r U p g r a d e Reservoir Upgrade (optional): If a reservoir is replaced, shock disassembly is required.
  • Page 31 Remove the spring clip and spring. Remove the spring clip and spring. Coil Spring Replacement: Coil Spring Replacement: Proceed to Coil Spring Installation. Proceed to Coil Spring Installation. Coil Spring Removal...

  • Page 32: Set Damping Adjusters

    S e t D a m p i n g A d j u s t e r s Select RT, Select+ RCT, Ultimate RC2T: Select RT, Select+ RCT, Ultimate RC2T: Rotate the Threshold (pedal) Rotate the Threshold (pedal) lever to the open position. lever to the open position.
  • Page 33 Ultimate DH RC2, Ultimate RC2T: Ultimate DH RC2, Ultimate RC2T: Rotate the High Speed Rotate the High Speed Compression (HSC) adjuster counterclockwise to the full open position Compression (HSC) adjuster counterclockwise to the full open position and count the number of detent clicks. and count the number of detent clicks.

  • Page 34: Reservoir Depressurization And Disassembly

    Verify all air pressure is removed from the suspension component. Failure to do so can result in SERIOUS INJURY OR DEATH. Refer to the Suspension Safety Precautions and Warnings section for detailed RockShox Schrader Valve Tool Pressurized Device warnings and instructions. ⚠ CAUTIO N - E YE HAZA RD Verify all pressure is removed from the shock before proceeding.
  • Page 35 Push the IFP reservoir cap into the reservoir until the retaining ring is Push the IFP reservoir cap into the reservoir until the retaining ring is visible and accessible. visible and accessible. Remove the retaining ring from the IFP reservoir. Remove the retaining ring from the IFP reservoir.
  • Page 36 Set the reservoir cap aside. Set the reservoir cap aside. RockShox Dynamic Seal Grease Apply a dab of grease to the end of the TORX T10 wrench. Apply a dab of grease to the end of the TORX T10 wrench.
  • Page 37 Pick (non-metallic) RockShox Dynamic Seal Grease Thread the RockShox IFP Puller Tool into the IFP (internal floating Thread the RockShox IFP Puller Tool into the IFP (internal floating piston). piston). Remove the IFP from the reservoir.
  • Page 38 Reservoir Upgrade: Apply grease to the new IFP o-ring and install it Apply grease to the new IFP o-ring and install it onto the new IFP. onto the new IFP. RockShox Suspension Cleaner RockShox Dynamic Seal Grease Reservoir Depressurization and Disassembly...

  • Page 39: Damper Disassembly

    D a m p e r D i s a s s e m b l y Slide the bottomout bumper up. Slide the bottomout bumper up. Secure a shop towel around the damper body to absorb oil. Secure a shop towel around the damper body to absorb oil. Install a small section of split plastic tube over the damper shaft to Install a small section of split plastic tube over the damper shaft to protect it.
  • Page 40 Place the Vivid Counter Measure Wrench onto the sealhead. Place the Vivid Counter Measure Wrench onto the sealhead. NOTICE Do not scratch the damper shaft. Scratches will cause oil to leak. Vivid Counter Measure Wrench Vivid Counter Measure Wrench Unthread the sealhead from the damper body. Unthread the sealhead from the damper body.
  • Page 41 Unthread and remove the spring preload adjuster from the damper body. Clean the spring preload adjuster. body. Clean the spring preload adjuster. RockShox Suspension Cleaner Reservoir Upgrade (optional): To continue with reservoir upgrade, proceed to Upgrade (optional) - Ultimate RC2T Reservoir.

  • Page 42: Upgrade (Optional) - Vivid Coil C1 Ultimate Rc2T Reservoir

    U p g r a d e ( o p t i o n a l ) - V i v i d C o i l C 1 U l t i m a t e R C 2 T R e s e r v o i r Vivid Coil Base R (Rebound only), Vivid Coil Select RT (Rebound and Threshold), Vivid Coil Select+ RCT (Rebound, Low Speed Compression, Threshold), and Vivid Coil Ultimate DH RC2 (Rebound and Low Speed Compression) shocks can be upgraded with the Ultimate RC2T Reservoir Upgrade kit, available separately.
  • Page 43 Select+ RCT, Ultimate DH RC2, : Select+ RCT, Ultimate DH RC2, : Unthread the left exposed reservoir Unthread the left exposed reservoir bolt (3 mm). bolt (3 mm). 3 mm 3 mm Unthread the right hidden reservoir bolt (3 mm). Unthread the right hidden reservoir bolt (3 mm).
  • Page 44 Clean the pin and o-ring. Clean the pin and o-ring groove. Reinstall the pin and o-ring back onto the eyelet (no grease). Reinstall the pin and o-ring back onto the eyelet (no grease). Pick (non-metallic) RockShox Suspension Cleaner No grease Upgrade (optional) - Vivid Coil C1 Ultimate RC2T Reservoir...
  • Page 45 Ultimate RC2T Upgrade Installation: Ultimate RC2T Upgrade Installation: Thread the right side reservoir Thread the right side reservoir bolt into the eyelet until the bolt head is about 3 mm from contacting bolt into the eyelet until the bolt head is about 3 mm from contacting the damper body.

  • Page 46: Sealhead Service And Travel Change

    Bottom Bumper included in the correct Travel Change kit. Refer to the tables within this section, at the appropriate step, for compatibilty. Refer to the RockShox Spare Parts Catalog for available Vivid Coil C1 Travel Change kits. Damper Shaft...
  • Page 47 The rebound circuit must be opened for reassembly and bleed. The rebound circuit must be opened for reassembly and bleed. Confirm the rebound adjuster is in the open position. Confirm the rebound adjuster is in the open position. Insert the rebound adjuster into the rebound adjuster cam. Rotate the Insert the rebound adjuster into the rebound adjuster cam.
  • Page 48 Insert a pick or small hex wrench through the center of the piston Insert a pick or small hex wrench through the center of the piston bottom post. bottom post. Use two picks to lift the check piston and check shims from the bottom Use two picks to lift the check piston and check shims from the bottom post.
  • Page 49 Unthread and remove the piston bottom post. Unthread and remove the piston bottom post. Travel Change (optional): Travel Change (optional): If travel is changed, the original bottom post If travel is changed, the original bottom post will not be reinstalled. will not be reinstalled.
  • Page 50 Remove the sealhead assembly. Remove the sealhead assembly. Firmly pull the top out spring and remove it from the sealhead. Firmly pull the top out spring and remove it from the sealhead. Inspect the inner sealhead bushing for excessive wear. If the bushing Inspect the inner sealhead bushing for excessive wear.
  • Page 51 (not required) installed during assembly with no sag gradients can be (not required) installed during reassembly. Refer to the reassembly. Refer to the RockShox Spare Parts Catalog RockShox Spare Parts Catalog for more for more available spare parts kits.
  • Page 52 Remove the sealhead bleed screw. Remove the sealhead bleed screw. 2 mm Remove the nylon compression ball from the sealhead. Remove the nylon compression ball from the sealhead. Place the sealhead on a flat surface. Place the sealhead on a flat surface. Insert a bearing punch (3/32"...
  • Page 53 Inspect the sealhead bushing for scratches. If the bushing is scratched, Inspect the sealhead bushing for scratches. If the bushing is scratched, the sealhead must be replaced. the sealhead must be replaced. RockShox Suspension Cleaner RockShox Suspension Cleaner Sealhead Service and Travel Change...
  • Page 54 Apply grease to a new inner sealhead wiper and install it. Apply grease to the bushings inside the center of the sealhead. Apply grease to the bushings inside the center of the sealhead. RockShox Dynamic Seal Grease RockShox Dynamic Seal Grease RockShox Dynamic Seal Grease Remove the outer o-ring from sealhead and discard it.
  • Page 55 Original and New Sealhead: Original and New Sealhead: Align the edge of the spring, and the gap Align the edge of the spring, and the gap in the spring flat and coil, with the bleed hole to allow for maximum oil in the spring flat and coil, with the bleed hole to allow for maximum oil flow.
  • Page 56 Push the rebound poker down into the damper shaft until it stops. This Push the rebound poker down into the damper shaft until it stops. This will open the rebound circuit and ensure the damper is properly bled will open the rebound circuit and ensure the damper is properly bled during assembly.
  • Page 57 Install the bottom post and tighten it to the specified torque. Install the bottom post and tighten it to the specified torque. Travel Change (optional): Travel Change (optional): If travel is changed, install the correct size If travel is changed, install the correct size bottom post.
  • Page 58 Install the piston nut onto the bottom post and tighten it to the Install the piston nut onto the bottom post and tighten it to the specified torque. specified torque. Remove the damper assembly from the vise and set it aside. Remove the damper assembly from the vise and set it aside.

  • Page 59: Oil Fill And Ifp Installation

    O i l F i l l a n d I F P I n s t a l l a t i o n All Vivid Coil Models: All Vivid Coil Models: The compression damper MUST be in the open The compression damper MUST be in the open position before oil fill and assembly.
  • Page 60 Fill the reservoir with more oil, then continue to tap on the top of the Fill the reservoir with more oil, then continue to tap on the top of the reservoir until no more bubbles emerge from the damper body. reservoir until no more bubbles emerge from the damper body.
  • Page 61 With your hand still firmly on the damper body (do not remove your With your hand still firmly on the damper body (do not remove your hand from the damper body), place the IFP, greased o-ring end hand from the damper body), place the IFP, greased o-ring end outward/up, into the IFP reservoir evenly.
  • Page 62 With your hand still over the top of the damper body, place the With your hand still over the top of the damper body, place the RockShox IFP Height Tool onto the IFP. RockShox IFP Height Tool onto the IFP.
  • Page 63 With your hand still covering the damper body, apply a dab of grease With your hand still covering the damper body, apply a dab of grease on the end of the TORX T10 wrench to hold the bleed screw on the on the end of the TORX T10 wrench to hold the bleed screw on the wrench, and carefully install the IFP bleed screw into the IFP.

  • Page 64: Damper Piston/Shaft/Eyelet Installation And Bleed

    D a m p e r P i s t o n / S h a f t / E y e l e t I n s t a l l a t i o n a n d B l e e d The Sealhead Spring Compressor Tool consists of two threaded The Sealhead Spring Compressor Tool consists of two threaded sections, which when the outer section is rotated, expand to compress...
  • Page 65 Slide the bumper and travel spacer (if installed) down to the wrench. Slide the bumper and travel spacer (if installed) down to the wrench. Install the Counter Measure Sealhead Spring Compressor Tool over the Install the Counter Measure Sealhead Spring Compressor Tool over the eyelet and damper shaft and insert the tab on the compressor tool into eyelet and damper shaft and insert the tab on the compressor tool into the notch in the wrench.
  • Page 66 Rotate the outer Counter Measure Sealhead Spring Compressor Tool Rotate the outer Counter Measure Sealhead Spring Compressor Tool counterclockwise by hand until it stops. counterclockwise by hand until it stops. When the tool stops rotating the sealhead spring will be fully When the tool stops rotating the sealhead spring will be fully compressed against the piston.
  • Page 67 While holding the shim with the flat pick, slowly insert the damper While holding the shim with the flat pick, slowly insert the damper piston into the damper body. piston into the damper body. Oil will displace through the piston and shims as the piston is installed. Oil will displace through the piston and shims as the piston is installed.
  • Page 68 Thread the sealhead into the damper body until it stops. Thread the sealhead into the damper body until it stops. Oil will purge through the sealhead bleed hole. Oil will purge through the sealhead bleed hole. Vivid Counter Measure Wrench Vivid Counter Measure Wrench Vivid Counter Measure Wrench Vivid Counter Measure Wrench...
  • Page 69 IFP Height Tool 3 mm Slowly Slowly push the RockShox IFP Height Tool down into the reservoir to push the RockShox IFP Height Tool down into the reservoir to push the IFP down to the appropriate depth. push the IFP down to the appropriate depth.
  • Page 70 Install the bleed screw into the bleed port and thread it in until you feel it contact the nylon compression ball, then tighten the bleed screw an additional ½ turn. Remove the IFP Height Tool from the reservoir. Remove the IFP Height Tool from the reservoir. Remove the 3 mm hex wrench from the tool.
  • Page 71 To check the bleed quality, insert the RockShox IFP Height Tool back To check the bleed quality, insert the RockShox IFP Height Tool back into the IFP reservoir and press down on the IFP with the IFP Height into the IFP reservoir and press down on the IFP with the IFP Height Tool, applying approximately 25 lbs / 111 N of force.
  • Page 72 RockShox Dynamic Seal Grease Insert one end of the retaining ring into the groove. Insert one end of the retaining ring into the groove.
  • Page 73 Pull up on the reservoir cap to prevent it from moving. RockShox Schrader Valve Pick Tool Install the red RockShox rear shock air valve adaptor tool onto the Install the red RockShox rear shock air valve adaptor tool onto the shock pump. shock pump.
  • Page 74 Install a new o-ring onto the reservoir air valve cap. Install a new o-ring onto the reservoir air valve cap. Install the air valve cap into the reservoir cap. Install the air valve cap into the reservoir cap. RockShox Schrader Valve Tool Damper Piston/Shaft/Eyelet Installation and Bleed...

  • Page 75: Remove Sealhead Compressor Tool

    R e m o v e S e a l h e a d C o m p r e s s o r T o o l Rotate the outer Counter Measure Sealhead Spring Compressor Tool Rotate the outer Counter Measure Sealhead Spring Compressor Tool clockwise to release pressure from the sealhead and eyelet spring clip.
  • Page 76 Remove the shop towels. Remove the shop towels. Clean the shock. Clean the shock. RockShox Suspension Cleaner RockShox Suspension Cleaner Remove Sealhead Compressor Tool...

  • Page 77: Coil Spring Installation

    C o i l S p r i n g I n s t a l l a t i o n Insert the rebound adjuster knob into the rebound adjuster cam. Insert the rebound adjuster knob into the rebound adjuster cam. Rotate the rebound adjuster cam fully clockwise until it stops.
  • Page 78 Rotate the eyelet to the original position. Rotate the eyelet to the original position. Install the spring clip. Install the spring clip. Rotate the spring clip and spring so the gap in the spring clip does not Rotate the spring clip and spring so the gap in the spring clip does not overlap the sharp end of the spring coil.
  • Page 79 Install the rebound adjuster and rotate it to the original setting. Install the rebound adjuster and rotate it to the original setting. Coil Spring Installation...

  • Page 80: Eyelet - Mounting Hardware And Bearing Mount Adapter

    If this works, you have completed mounting hardware and bushing service. If you are unable to install your standard eyelet mounting hardware using your fingers, use the RockShox Rear Shock 1/2" x 1/2" Bushing Tool. Deluxe is pictured. Procedures are the same for Vivid Coil.
  • Page 81 RockShox 1/2" x 1/2" Rear Shock Bushing Tool Hold the catcher secure with a 13 mm wrench. Hold the catcher secure with a 13 mm wrench.
  • Page 82 Press an end spacer, tapered side first, onto each end of the Press an end spacer, tapered side first, onto each end of the bushing pin. bushing pin. The bushing pin should be centered in the eyelet and no portion of The bushing pin should be centered in the eyelet and no portion of either end should protrude from either end spacer.

  • Page 83: Upgrade (Optional)- Standard Eyelet To Bearing Mount Adapter Installation

    U p g r a d e ( o p t i o n a l ) - S t a n d a r d E y e l e t t o B e a r i n g M o u n t A d a p t e r I n s t a l l a t i o n The bearing mount upgrade adapter is only compatible with a bearing mounting frame.
  • Page 84 Clean the eyelet. Clean the eyelet. Confirm the crush rings are seated in the grooves on the adapters. Confirm the crush rings are seated in the grooves on the adapters. Insert the internal threaded bearing adaptor into the eyelet and press Insert the internal threaded bearing adaptor into the eyelet and press it in squarely.
  • Page 85 Clamp one side of the bearing into a vise. Vise and flat vise blocks Place the Bearing Mount Adapter socket onto the bearing. Place the Bearing Mount Adapter socket onto the bearing. RockShox Bearing Mount Adapter RockShox Bearing Mount Adapter Socket Socket...
  • Page 86 Tighten the bearing to the specified torque. Tighten the bearing to the specified torque. RockShox Bearing Mount Adapter Socket 10 N∙m (88 in-lb) Upgrade (optional)- Standard Eyelet to Bearing Mount Adapter Installation...

  • Page 87: Shock Installation And Setup

    Reinstall the rear shock as instructed by your frame manufacturer. Set coil spring sag. Refer to the Set coil spring sag. Refer to the RockShox Suspension Tuning and Setup Guide RockShox Suspension Tuning and Setup Guide for setting coil spring sag procedures.
  • Page 88 ASIAN HEADQUARTERS WORLD HEADQUARTERS EUROPEAN HEADQUARTERS SRAM Taiwan SRAM, LLC SRAM Europe No. 1598-8 Chung Shan Road 1000 W. Fulton Market, 4th Floor Paasbosweg 14-16 Shen Kang Hsiang, Taichung City Chicago, Illinois 60607 3862ZS Nijkerk Taiwan U.S.A. Niederlande...

This manual is also suitable for:

Vivid coil ultimate rc2t 2025Vivid coil ultimate dh rc2 2025Vivid coil select+ rct 2025Vivid coil select rt 2025Vivid coil base r 2025Rs-vivc-ult-c1 ... Show all

Table of Contents