IBM I VIRTUALIZATION - READ ME FIRST 7-9-2010 Manual page 3

9.3.2.1. Path redundancy with a single VIOS
9.3.2.2. Redundant VIOS LPARs with client-side MPIO
9.3.3 Subsystem Device Driver - Path Control Module (SDDPCM)
10. Attaching open storage to IBM i through VIOS
10.1. Open storage configuration
10.2. VIOS installation and configuration
10.3. IBM i installation and configuration
10.4. HMC provisioning of open storage in VIOS
10.5. End-to-end LUN device mapping
11. Post-install tasks and considerations
11.1. Configure IBM i networking
11.2. How to perform IBM i operator panel functions
11.3. How to display the IBM i partition System Reference Code (SRC) history
11.4. Client IBM i LPARs considerations and limitations
11.5. Configuring Electronic Customer Support (ECS) over LAN
11.6. Backups
12. DS4000 and DS5000 Copy Services and IBM i
12.1. FlashCopy and VolumeCopy
12.2. Enhanced Remote Mirroring (ERM)
13. IBM i using SAN Volume Controller (SVC) storage through VIOS
13.1. IBM i and SVC concepts
13.2. Attaching SVC storage to IBM i
14. SVC Copy Services and IBM i
14.1. FlashCopy
14.1.1. Test scenario
14.1.2. FlashCopy statements
14.2. Metro and Global Mirror
14.2.1. Test scenario
14.2.2. Metro and Global Mirror support statements
15. XIV Copy Services and IBM i
16. DS5000 direct attachment to IBM i
16.1. Overview
16.2. Supported hardware and software
16.3. Best practices, limitations and performance
16.4. Sizing and configuration
16.5. Copy Services support
17. N_Port ID Virtualization (NPIV) for IBM i
17.1. Overview
17.2. Supported hardware and software
17.3. Configuration
17.4. Copy Services support
18. Additional resources
19. Trademarks and disclaimers
3