Related Manuals for JEKKO SPD360CDH
Summarization of Contents
1 PREFACE
1.1 General Information
Provides overview of the manual's purpose, scope, and notes for users and technicians.
DIMENSIONS AND LOADING DIAGRAM OF THE CRANE WITH HOOK
SPD265 - SPD266
Provides dimensional and load capacity diagrams for SPD265 and SPD266 models.
2 SAFETY INFORMATION
2.1 Rules
Lists operative rules for operator safety, including personal conduct and attire.
2.5 Emergency stop
Location and Restart of Emergency Devices
Details location of emergency devices and procedure to restart the machine.
3 MACHINE SIGNALS AND CONTROLS
3.1 Main switchboard
Identifies and describes the functions of controls and indicators on the main switchboard.
Key alternate functions:
TEMPORARY BY-PASS
Procedure for temporarily bypassing safety systems in overload situations.
FIXED BY-PASS
Explains fixed by-pass usage, cautioning about disabling safety systems.
ANTICOLLISION SYSTEM
Details how to lift, save, and deactivate the anticollision system.
4 USE OF THE MACHINE IN REGULAR WORKING CONDITIONS
4.1 Machine starting
Instructions for starting both battery (C+) and engine (CDH) versions.
4.2 Handling and stabilization of the machine
Details on driving the machine and proper stabilization procedures.
Safety Cautions for Operation
Operation with Tracks on Ground
Warning against operating the machine when its tracks are on the ground.
Stabilizer Sensor Tampering & Floor Integrity
Precautions against tampering with sensors and working on unknown floors.
8 TROUBLESHOOTING
Battery Charger Alarms (BC1, NG1)
Details states, alarms, and actions for BC1 and NG1 battery chargers.
9 STANDARD OPERATOR MAINTENANCE
Ordinary Maintenance: Washing & Lubrication
Guidance on washing and lubricating the machine for regular maintenance.
10 SERVICING FORMS
10.1 Introduction to Servicing Forms
Explains the requirement for a maintenance register and ORMET SPA's model.
11 ENCLOSURE
11.1 Summarizing List of Interventions
Template for recording date, type of intervention, report number, and signature.
12 TOOLS
12.1 380V Feeding Kit for SPD265C+/266C+/360C+
Details the three-phase feeding kit PP380-4E for operating the crane.
Need help?
Do you have a question about the SPD360CDH and is the answer not in the manual?
Questions and answers