Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-2DT6232X-AELY(T5)
Summarization of Contents
Legal Information
About this Manual
Provides instructions for using the Product, subject to change due to updates.
Trademarks
Lists Hikvision's trademarks and those of other respective owners.
Disclaimer
Outlines the product's legal disclaimer, warranties, and liability limitations.
Chapter 1 Overview
Product Introduction
Introduces the F Series Network Speed Dome integration of HD camera, PTZ, and VCA.
Key Function
Details the device's key functions including smart features like Road Traffic and Face Capture.
PTZ Functions
Describes the device's PTZ capabilities such as presets, scans, and smart tracking.
System Requirement
Specifies the recommended computer and web browser requirements for operation.
Chapter 2 Device Activation and Accessing
Activate Device
Guide to activating the device by setting a strong password.
Activate Device via Web Browser
Step-by-step instructions for activating the device using a web browser.
Activate via SADP
Procedure for activating and modifying IP address using the SADP tool.
Access Device via Web Browser
Details on accessing the device's interface through a web browser.
Plug-in Installation
Instructions for installing necessary plug-ins for browser compatibility.
Admin Password Recovery
Methods to recover the admin password via security question or email.
Illegal Login Lock
Security feature to block access after multiple failed login attempts.
Chapter 3 Smart Function
Allocate VCA Resource
Enabling and allocating resources for Video Content Analysis (VCA) functions.
Set Camera Info
Customizing device information for identification and management.
Road Traffic
Capturing vehicle information and license plates on roads.
Set Vehicle Detection Rule
Configuring rules for detecting vehicles and license plates.
Picture Settings
Configuring captured vehicle picture settings like quality and overlay.
Advanced Parameters
Displays the version of the license plate recognition algorithm.
Set Armed License Plates
Specifying vehicles for arming by adding license plates to lists.
Face Capture
Functionality for detecting and capturing human faces.
Set Auto Face Capture Rule
Setting rules for automatic face capture and linkage actions.
Operate Manual Face Capture
Manually capturing target faces in live view images.
Overlay and Capture
Configuring capture parameters and information display for targets.
Face Capture Algorithm Parameters
Setting and optimizing parameters for the face capture algorithm.
Face Comparison
Comparing captured faces with library pictures for recognition.
Set Face Picture Library
Creating and managing libraries for storing modeled human faces.
Set Face Picture Comparison
Comparing captured faces with library and outputting comparison results.
View Face Comparison Result
Viewing the results of face picture comparison.
Capture Target with Feature
Detecting, capturing, and uploading features of various targets.
Set Detection Rule
Setting rules and parameters for target feature detection.
Advanced Parameters
Setting algorithm library parameters for improved detection performance.
Smart Display
Displaying real-time pictures from smart functions and analyzing targets.
Chapter 4 PTZ
PTZ Control
Controlling the device's pan, tilt, and zoom functions via live view interface.
Set Preset
Defining and calling predefined image positions for quick access.
Special Presets
Calling presets with specific commands to enable corresponding functions.
Set Patrol Scan
Automatically moving the device among multiple defined presets.
Set One-Touch Patrol
Automatically adding presets to a patrol path and starting patrol scan.
Set Pattern Scan
Moving the device according to a recorded pattern for automated movement.
Set Limit
Limiting the device's movement range within specified boundaries.
Set Initial Position
Setting a relative initial position for the device as a base point.
Set Scheduled Tasks
Scheduling specific tasks for the device to perform during certain periods.
Set Park Action
Defining actions or returning to a position after a period of inactivity.
Set One-Touch Park
Instantly starting a park action for the device.
Set Privacy Mask
Covering specific areas on the live image to protect personal privacy.
Set Device Position
Setting the device's position details, including North direction and gyroscopes.
Set Manual Compass
Manually determining and setting the North direction for the device.
Set Auto Compass
Automatically determining North direction using the device's built-in e-compass.
Set Power Off Memory
Resuming the previous PTZ status of the device after a power interruption.
Set PTZ Priority
Setting the PTZ priority for different control signals.
Set Rapid Focus
Reducing focusing time by calibrating scenes for rapid focus functionality.
Chapter 5 Live View
Live View Parameters
Configuring parameters for live view display and functionality.
Start and Stop Live View
Instructions for starting and stopping the live video stream.
Aspect Ratio
Setting the display ratio of the image width to height.
Live View Stream Type
Selecting the live view stream type according to user needs.
Quick Set Live View
Quick access to display, OSD, and video/audio settings on the live view page.
Select the Third-Party Plug-in
Changing plug-ins for live view compatibility with different browsers.
Start Digital Zoom
Enabling digital zoom to view detailed regions of the image.
Conduct Regional Focus
Enabling focus adjustment on specific areas of the image.
Conduct Regional Exposure
Optimizing exposure for selected regions with unbalanced brightness.
Count Pixel
Getting height and width pixel information of a selected region in the live view.
Light
Turning the illuminator on or off.
Operate Wiper
Controlling the device's wiper via the web browser interface.
Lens Initialization
Resetting the motorized lens for blurred images due to zoom or focus.
Track Manually
Manually selecting a target in the live view for the device to track.
Conduct 3D Positioning
Relocating a selected area to the center of the image.
Set Transmission Parameters
Adjusting transmission parameters to resolve issues with network conditions.
Chapter 6 Video and Audio
Video Settings
Configuring video parameters including stream type, encoding, and resolution.
Stream Type
Specifying parameters for different stream types like main and sub streams.
Video Type
Selecting stream content: video only or video and audio.
Resolution
Selecting video resolution based on actual needs and network capacity.
Bitrate Type and Max. Bitrate
Setting constant or variable bitrate for video compression.
Video Quality
Configuring video quality when using variable bitrate settings.
Frame Rate
Setting the video stream update frequency, measured in frames per second (fps).
Video Encoding
Selecting compression standards such as H.264, H.265, and MJPEG.
Profile
Setting profile for image quality and network bandwidth requirements.
I-Frame Interval
Defining the number of frames between I-frames for data reliability.
SVC
Scalable Video Coding for encoding high-quality video bitstreams.
Smoothing
Adjusting stream smoothness for fluency versus video quality.
Audio Settings
Setting audio parameters like encoding and environmental noise filtering.
Audio Input
Configuring the audio input source, mode, and volume.
Environmental Noise Filter
Filtering environmental noise to improve audio clarity.
Two-way Audio
Enabling two-way audio communication between monitoring center and target.
ROI
Region of Interest encoding for prioritizing video compression resources.
Set ROI
Assigning encoding resources to interest regions for higher quality.
Display Info. on Stream
Marking objects in video stream with rules for event detection.
Display Settings
Parameter settings for adjusting various image features.
Scene Mode
Predefined image parameter sets for different installation environments.
Image Parameters Switch
Automatically switching image parameters based on set time periods.
Mirror
Adjusting image display to normal orientation if it appears reversed.
Video Standard
Setting video signal standards like NTSC or PAL.
OSD
Customizing On-Screen Display information on the video stream.
Chapter 7 Video Recording and Picture Capture
Storage Settings
Configuration of common storage paths like memory cards and network storage.
Memory Card
Viewing and managing memory card capacity, status, encryption, and lifespan.
Set FTP
Configuring the FTP server for saving captured images and snapshots.
Set NAS
Using a network server as a network disk for storing files.
eMMC Protection
Automatically stopping eMMC use when its health status is poor.
Set Cloud Storage
Uploading captured pictures and data to the cloud for storage and analysis.
Video Recording
Introduction to manual and scheduled recording operations.
Record Automatically
Recording video automatically based on configured time periods or events.
Record Manually
Starting and stopping video recording manually.
Playback and Download Video
Searching, playing back, and downloading stored video files.
Capture Configuration
Configuring automatic or manual picture capture settings.
Capture Automatically
Capturing pictures automatically during configured time periods.
Capture Manually
Manually capturing snapshots from the live view or playback window.
View and Download Picture
Searching, viewing, and downloading captured pictures.
Chapter 8 Event and Alarm
Basic Event
Configuration of basic event types such as motion detection.
Set Motion Detection
Detecting moving objects and triggering linkage actions.
Set Video Tampering Alarm
Triggering an alarm when the configured area is covered or obstructed.
Set Exception Alarm
Triggering alarms for exceptions like network disconnection or HDD errors.
Set Alarm Input
Triggering device actions based on external alarm signals.
Smart Event
Configuration of various smart event detection types.
Detect Audio Exception
Detecting abnormal sound events like sudden intensity changes.
Set Intrusion Detection
Detecting object movement within a predefined area for intrusion alerts.
Set Line Crossing Detection
Detecting object movement across a predefined line for crossing alerts.
Set Region Entrance Detection
Detecting object movement entering a predefined area.
Set Region Exiting Detection
Detecting object movement exiting a predefined area.
Set Object Removal Detection
Detecting objects removed from a predefined area.
Set Unattended Baggage Detection
Detecting unattended objects left in a predefined area.
Set Tracking Parameters
Adjusting motion parameters for improved target tracking performance.
Chapter 9 Arming Schedule and Alarm Linkage
Set Arming Schedule
Setting valid time periods for device tasks and operations.
Linkage Method Settings
Enabling and configuring linkage functions for events or alarms.
Trigger Alarm Output
Sending alarm information to connected alarm output devices.
FTP/NAS/Memory Card Uploading
Sending alarm information to FTP, NAS, or memory card storage.
Send Email
Sending email notifications with alarm information to designated addresses.
Notify Surveillance Center
Uploading alarm information to a surveillance center.
Smart Tracking
Tracking detected targets when an alarm event is triggered.
Trigger Recording
Recording video of detected alarm events based on trigger settings.
Chapter 10 Network Settings
TCP/IP
Configuring TCP/IP settings for proper network operation.
Multicast
Group communication for addressing destination devices simultaneously.
Multicast Discovery
Automatic detection of network cameras via private multicast protocol.
Port
Modifying device ports to avoid network conflicts and ensure accessibility.
Port Mapping
Accessing devices through specified ports via port mapping configuration.
Set Auto Port Mapping
Enabling UPnP for automatic port mapping configuration.
Set Manual Port Mapping
Manually configuring port mapping settings for device access.
Set Port Mapping on Router
Configuring port mapping settings directly on the router.
SNMP
Setting the SNMP network management protocol for device information retrieval.
Access to Device via Domain Name
Accessing the device using a domain name via Dynamic DNS (DDNS).
Access to Device via PPPoE Dial Up Connection
Accessing the device via PPPoE auto dial-up connection for network access.
Accessing via Mobile Client
Using the Hik-Connect app for mobile device access and monitoring.
Enable Hik-Connect Service on Camera
Enabling the Hik-Connect service on the camera before use.
Set Up Hik-Connect
Installing and setting up the Hik-Connect application on mobile devices.
Add Camera to Hik-Connect
Adding the camera to the Hik-Connect account for remote access.
Set ISUP
Registering the device on an ISUP platform for remote management.
Set Open Network Video Interface
Configuring user settings for the Open Network Video Interface protocol.
Set Network Service
Controlling the ON/OFF status of various network protocols as needed.
Set Alarm Server
Sending alarms to destination IP addresses or host names via HTTP/HTTPS/ISUP.
TCP Acceleration
Improving latency and reducing packet loss in poor network conditions.
Traffic Shaping
Shaping and smoothing video data packets before transmission.
Set SRTP
Setting Secure Real-time Transport Protocol for encryption and authentication.
Chapter 11 System and Security
View Device Information
Viewing device details like model, serial number, and firmware version.
Restore and Default
Restoring device parameters to default or factory settings.
Search and Manage Log
Locating and troubleshooting problems using system log files.
Import and Export Configuration File
Speeding up batch configuration via importing and exporting configuration files.
Export Diagnose Information
Exporting running logs, system, and hardware information for diagnostics.
Reboot
Rebooting the device via the web browser interface.
Upgrade
Upgrading the device firmware with a new package.
View Open Source Software License
Viewing licenses for open source software used in the device.
Set Live View Connection
Controlling the maximum number of simultaneous remote live view connections.
Time and Date
Configuring time zone, time synchronization, and Daylight Saving Time (DST).
Synchronize Time Manually
Manually synchronizing the device's time and date settings.
Synchronize Time by Satellite
Synchronizing time using a satellite signal for accurate timekeeping.
Set NTP Server
Setting an NTP server for accurate time synchronization.
Set DST
Configuring Daylight Saving Time (DST) settings based on region.
Set RS-485
Configuring RS-485 parameters for external device communication.
Security
Improving system security by setting various security parameters.
Authentication
Setting RTSP and WEB authentication for network access security.
Set IP Address Filter
Filtering IP addresses to allow or forbid access control.
Set MAC Address Filter
Filtering MAC addresses to allow or forbid access control.
Set HTTPS
Enabling HTTPS for encrypted transmission and identity authentication.
Security Audit Log
Searching and analyzing security log files for intrusion and event troubleshooting.
Set QoS
Improving network delay and congestion by setting data sending priority.
Set IEEE 802.1X
Authenticating user permission for connected devices using IEEE 802.1X.
SSH
Secure Shell protocol for network services over unsecured networks.
Control Timeout Settings
Automatically logging out from the device after a period of inactivity.
Certificate Management
Managing server/client certificates and CA certificates, and alarms for expiration.
User and Account
Adding, modifying, and managing user accounts and their permissions.
Need help?
Do you have a question about the DS-2DT6232X-AELY(T5) and is the answer not in the manual?
Questions and answers